From: https://chatgpt.com/c/6a299d9e-ca0c-83ea-babc-6cf02e126458



you asked

message time: 2026-06-10 18:24:21

je veux développer un lecteur de video sur google tv qui peut lire le flux extream


chatgpt response

Je vais cadrer ça proprement : Google TV = Android TV, donc le lecteur doit être natif Android, avec Media3/ExoPlayer pour éviter de réinventer la roue carrée, invention humaine déjà très complète. Je vérifie les docs actuelles avant de te donner une base technique exploitable.

Je pars du principe que par “flux extream” tu veux dire Xtream Codes / IPTV compatible Xtream. Donc oui, c’est faisable sur Google TV, qui repose sur Android TV. La voie propre : application Android TV native en Kotlin + Jetpack Compose for TV + Media3 ExoPlayer. Faire ça autrement serait une invitation à souffrir, donc évidemment l’humanité l’a déjà essayé.

1. Architecture recommandée

Stack technique

Élément Choix recommandé
Plateforme Android TV / Google TV
Langage Kotlin
Interface Jetpack Compose for TV
Lecteur vidéo AndroidX Media3 ExoPlayer
Flux supportés HLS .m3u8, MPEG-TS .ts, MP4, DASH selon le serveur
API Xtream player_api.php, get.php, xmltv.php
Stockage DataStore ou Room
Réseau Retrofit ou Ktor
Publication APK / AAB Google Play TV

Google recommande Compose for TV pour construire des interfaces adaptées à la télécommande, au focus et aux grands écrans. Media3 ExoPlayer est le composant moderne pour lire des fichiers ou flux vidéo/audio locaux ou distants. (Android Developers)

2. Fonctionnement d’un flux Xtream

Un accès Xtream contient généralement :

Serveur : http://exemple.com:8080
Username : user
Password : pass

Les services compatibles Xtream utilisent souvent des endpoints comme :

/player_api.php?username=USER&password=PASS
/player_api.php?username=USER&password=PASS&action=get_live_streams
/player_api.php?username=USER&password=PASS&action=get_vod_streams
/get.php?username=USER&password=PASS&type=m3u_plus&output=m3u8
/xmltv.php?username=USER&password=PASS

Ces formats sont largement utilisés par les fournisseurs Xtream compatibles, même si l’écosystème est assez “documentation éparpillée dans un tiroir en feu”. Les exemples publics montrent notamment get.php pour récupérer une playlist M3U et player_api.php pour récupérer les chaînes, VOD, séries et EPG. (GitHub)

3. Ce que ton application doit faire

MVP conseillé

La première version devrait contenir :

Écran de connexion Xtream

URL serveur
Nom d’utilisateur
Mot de passe


Validation du compte

Appel à player_api.php
Vérification que l’abonnement est actif


Catalogue

Chaînes Live
Films VOD
Séries
Catégories


Lecteur vidéo

Lecture HLS .m3u8
Lecture MPEG-TS .ts
Pause / lecture
Retour
Changement de chaîne
Gestion erreurs réseau


Interface TV

Navigation avec télécommande
Focus clair
Grandes cartes
Texte lisible
Aucun élément minuscule, ce n’est pas une appli pour fourmis.

4. Dépendances Android nécessaires

Dans build.gradle.kts :

dependencies {
    val media3Version = "1.10.1"

    implementation("androidx.media3:media3-exoplayer:$media3Version")
    implementation("androidx.media3:media3-exoplayer-hls:$media3Version")
    implementation("androidx.media3:media3-exoplayer-dash:$media3Version")
    implementation("androidx.media3:media3-ui:$media3Version")
    implementation("androidx.media3:media3-session:$media3Version")

    implementation("androidx.tv:tv-foundation:1.0.0")
    implementation("androidx.tv:tv-material:1.0.0")

    implementation("com.squareup.retrofit2:retrofit:2.11.0")
    implementation("com.squareup.retrofit2:converter-gson:2.11.0")
}

La version stable Media3 indiquée par Android Developers au 12 mai 2026 est 1.10.1, avec des modules pour ExoPlayer, HLS, DASH, UI, Leanback et MediaSession. (Android Developers)

5. Manifest Android TV

Dans AndroidManifest.xml :

<manifest xmlns:android="http://schemas.android.com/apk/res/android">

    <uses-permission android:name="android.permission.INTERNET" />

    <uses-feature
        android:name="android.software.leanback"
        android:required="true" />

    <uses-feature
        android:name="android.hardware.touchscreen"
        android:required="false" />

    <application
        android:banner="@drawable/tv_banner"
        android:icon="@mipmap/ic_launcher"
        android:label="Mon Lecteur TV"
        android:theme="@style/Theme.App">

        <activity
            android:name=".MainActivity"
            android:exported="true">

            <intent-filter>
                <action android:name="android.intent.action.MAIN" />
                <category android:name="android.intent.category.LEANBACK_LAUNCHER" />
            </intent-filter>

        </activity>

    </application>
</manifest>

Pour être reconnu comme une app TV, Android demande une activité compatible TV avec le launcher Leanback, et Google Play impose aussi des critères de qualité spécifiques aux apps Android TV. (Android Developers)

6. Modèle de configuration Xtream

data class XtreamConfig(
    val serverUrl: String,
    val username: String,
    val password: String
)

Normalisation simple :

fun cleanServerUrl(url: String): String {
    return url.trim().removeSuffix("/")
}

7. Générer une URL de lecture

Pour une chaîne live :

fun buildLiveUrl(
    config: XtreamConfig,
    streamId: Int,
    extension: String = "m3u8"
): String {
    val baseUrl = cleanServerUrl(config.serverUrl)
    return "$baseUrl/live/${config.username}/${config.password}/$streamId.$extension"
}

Pour VOD :

fun buildVodUrl(
    config: XtreamConfig,
    streamId: Int,
    extension: String = "mp4"
): String {
    val baseUrl = cleanServerUrl(config.serverUrl)
    return "$baseUrl/movie/${config.username}/${config.password}/$streamId.$extension"
}

Pour séries :

fun buildSeriesUrl(
    config: XtreamConfig,
    episodeId: Int,
    extension: String = "mp4"
): String {
    val baseUrl = cleanServerUrl(config.serverUrl)
    return "$baseUrl/series/${config.username}/${config.password}/$episodeId.$extension"
}

Certains fournisseurs utilisent .ts, d’autres .m3u8. Pour Google TV, privilégie HLS .m3u8 quand disponible : ExoPlayer supporte officiellement HLS, DASH et d’autres formats courants, mais les codecs internes doivent aussi être compatibles avec l’appareil. (Android Developers)

8. Lecteur vidéo avec Media3 ExoPlayer

Exemple simple en Kotlin Compose :

@Composable
fun VideoPlayerScreen(
    streamUrl: String
) {
    val context = LocalContext.current

    val player = remember {
        ExoPlayer.Builder(context).build().apply {
            val mediaItem = MediaItem.fromUri(streamUrl)
            setMediaItem(mediaItem)
            prepare()
            playWhenReady = true
        }
    }

    DisposableEffect(Unit) {
        onDispose {
            player.release()
        }
    }

    AndroidView(
        modifier = Modifier.fillMaxSize(),
        factory = { ctx ->
            PlayerView(ctx).apply {
                this.player = player
                useController = true
                keepScreenOn = true
            }
        }
    )
}

Ce code lit directement une URL .m3u8, .ts, .mp4 ou autre format compatible. Media3 fournit l’interface Player pour lire, mettre en pause, chercher dans le flux et exposer les informations de lecture. (Android Developers)

9. API Retrofit pour Xtream

interface XtreamApi {

    @GET("player_api.php")
    suspend fun getAccountInfo(
        @Query("username") username: String,
        @Query("password") password: String
    ): XtreamAccountResponse

    @GET("player_api.php")
    suspend fun getLiveStreams(
        @Query("username") username: String,
        @Query("password") password: String,
        @Query("action") action: String = "get_live_streams"
    ): List<LiveStreamDto>

    @GET("player_api.php")
    suspend fun getVodStreams(
        @Query("username") username: String,
        @Query("password") password: String,
        @Query("action") action: String = "get_vod_streams"
    ): List<VodStreamDto>

    @GET("player_api.php")
    suspend fun getSeries(
        @Query("username") username: String,
        @Query("password") password: String,
        @Query("action") action: String = "get_series"
    ): List<SeriesDto>
}

Exemple DTO live :

data class LiveStreamDto(
    val name: String,
    val stream_id: Int,
    val stream_icon: String?,
    val category_id: String?,
    val epg_channel_id: String?
)

10. Interface TV recommandée

Accueil

[Continuer à regarder]

[Live TV]
  Sport | News | Films | Enfants | Généraliste

[VOD]
  Films récents | Action | Comédie | Drame

[Séries]
  Derniers épisodes | Populaires

Navigation télécommande

L’interface doit être pensée pour :

boutons larges ;
focus visible ;
navigation horizontale/verticale fluide ;
retour rapide au lecteur ;
changement de chaîne avec haut/bas ;
recherche simple ;
favoris.

Sur TV, le focus est plus important que le design décoratif. Une belle interface impossible à naviguer avec une télécommande reste une punition, pas un produit.

11. Fonctions importantes à prévoir

Fonction Priorité
Lecture Live Très haute
Lecture VOD Haute
Séries Haute
Favoris Haute
Reprise de lecture Moyenne
EPG / guide TV Haute
Recherche Haute
Contrôle parental Moyenne
Multi-profils Moyenne
Catch-up TV Selon fournisseur
Sous-titres Haute pour VOD
Choix qualité Selon flux

12. Points sensibles

Légalité

Ton lecteur doit uniquement lire des flux pour lesquels l’utilisateur ou le fournisseur possède les droits. Ne construis pas une app orientée contournement, piratage, partage d’identifiants ou accès non autorisé. En plus d’être illégal, c’est le genre de décision qui transforme un projet commercial en dossier pénible.

Sécurité

Ne stocke pas les identifiants en clair.

Utilise :

EncryptedSharedPreferences ou DataStore chiffré ;
HTTPS si le fournisseur le permet ;
masquage du mot de passe ;
suppression rapide du compte ;
aucun log contenant username/password.

Compatibilité

Tous les flux IPTV ne sont pas propres. Certains serveurs envoient des .ts instables, des codecs douteux ou des playlists mal formées. ExoPlayer est solide, mais il ne fera pas de miracle avec un flux bricolé au chalumeau.

13. Plan de développement conseillé

Phase 1 — MVP

Créer projet Android TV Kotlin.
Ajouter Media3.
Ajouter écran login Xtream.
Tester player_api.php.
Afficher les chaînes live.
Lire une chaîne avec ExoPlayer.

Phase 2 — Catalogue

Catégories live.
VOD.
Séries.
Images.
Recherche.
Favoris.

Phase 3 — Expérience TV

Focus télécommande.
Design Google TV.
Écran lecteur avancé.
Zapping rapide.
Guide EPG.

Phase 4 — Produit commercial

Abonnements ou licence app.
Analytics anonymes.
Crash reporting.
Publication Google Play TV.
Politique de confidentialité.
Conditions d’utilisation.

Conclusion

Le meilleur choix technique est :

Android TV natif
+ Kotlin
+ Jetpack Compose for TV
+ Media3 ExoPlayer
+ API Xtream

C’est stable, compatible Google TV, publiable sur Play Store et suffisamment flexible pour lire du live, VOD, séries et EPG. Le vrai travail ne sera pas seulement le lecteur vidéo, mais la qualité de l’expérience TV : navigation fluide, zapping rapide, gestion des erreurs et interface propre. Le lecteur, lui, c’est la partie presque civilisée de cette aventure.


you asked

message time: 2026-06-10 18:26:49

ok, donne moi les fichiers à créer en zip


chatgpt response

Je vais te préparer un ZIP de base complet pour un lecteur Google TV compatible Xtream : projet Android Kotlin, écran de connexion, liste de chaînes et lecteur vidéo. Bref, le squelette avant que les bugs ne viennent réclamer leur héritage.

Je crée un projet minimal mais structuré, pas juste trois fichiers jetés dans un dossier comme une armoire de bureau municipal. Il contiendra déjà l’API Xtream, l’interface TV, et le lecteur Media3/ExoPlayer.

C’est prêt. J’ai créé un ZIP avec un projet Android TV / Google TV Kotlin pour lire un accès Xtream compatible, avec écran de connexion, récupération des chaînes Live et lecteur vidéo Media3/ExoPlayer. Voilà, un squelette propre, pas une pile de fichiers abandonnés dans un coin numérique.

Télécharger le ZIP

📦 Télécharger le projet Xtream Google TV Player

Ce que le ZIP contient

Projet Android Kotlin complet.
MainActivity.kt
Écran de connexion Xtream.
Liste des chaînes Live.
Lecteur vidéo avec Media3 ExoPlayer.
API Retrofit vers player_api.php.
Génération d’URL Live Xtream.
Manifest compatible Android TV / Google TV.
README avec les instructions de lancement.

Versions utilisées

Le projet utilise notamment Media3 1.10.1, version listée officiellement dans les releases AndroidX Media3, ainsi que les dépendances Compose TV tv-material:1.1.0 et tv-foundation:1.0.0. J’ai aussi configuré Compose avec le BOM 2026.04.01, recommandé dans les notes Compose d’avril 2026. (Android Developers)

Important

Je n’ai pas compilé le projet dans Android Studio ici, parce que l’environnement de génération Android complet n’est pas disponible dans cette session. Le ZIP est structuré pour être ouvert directement dans Android Studio. Il faudra ensuite faire une synchronisation Gradle, puis lancer sur un appareil ou émulateur Android TV / Google TV. Le projet utilise Android Gradle Plugin 9.0.1, dont la compatibilité officielle mentionne notamment JDK 17 et SDK Android 36. (Android Developers)


you asked

message time: 2026-06-10 18:32:52

ok. donne moi les commandes pour compiler et créer une apk et le transférer dans la box


chatgpt response

Voici les commandes Windows PowerShell pour compiler le projet, créer l’APK et l’envoyer dans ta box Google TV. Parce qu’évidemment, brancher une télé à un ordinateur n’était pas assez absurde, il fallait aussi lui parler en ADB.

Les commandes Android officielles passent par le Gradle Wrapper (gradlew.bat sous Windows) et l’installation peut se faire avec ADB. Android indique aussi que le projet AGP 9.0 utilise JDK 17 et Gradle 9.1.0 minimum. (Android Developers)


1. Décompresser le ZIP

Adapte le chemin selon l’endroit où tu as téléchargé le fichier.

cd D:\07-Logiciels\03-FIN65

Expand-Archive -Path "$env:USERPROFILE\Downloads\xtream-google-tv-player.zip" -DestinationPath .
cd .\xtream-google-tv-player


2. Vérifier Java et ADB

java -version
adb version

Il faut avoir :

Java 17
ADB installé avec Android SDK Platform Tools

Si adb n’est pas reconnu, ajoute temporairement Platform Tools au PATH :

$env:Path += ";$env:LOCALAPPDATA\Android\Sdk\platform-tools"
adb version


3. Créer le Gradle Wrapper si absent

Dans le ZIP que je t’ai donné, il n’y a pas encore gradlew.bat. Donc il faut le générer une seule fois. Oui, évidemment, encore une petite cérémonie rituelle avant de compiler.

Installe Gradle si besoin :

winget install Gradle.Gradle

Puis dans le dossier du projet :

gradle wrapper --gradle-version 9.1.0

Vérifie :

.\gradlew.bat --version


4. Compiler l’APK debug

.\gradlew.bat clean
.\gradlew.bat :app:assembleDebug

L’APK sera créé ici :

app\build\outputs\apk\debug\app-debug.apk


5. Activer ADB sur la box Google TV

Sur ta box Google TV :

Paramètres
> Système
> À propos
> Cliquer 7 fois sur "Build" / "Version"

Ensuite :

Paramètres
> Système
> Options pour les développeurs
> Activer le débogage USB / débogage réseau / débogage sans fil

Selon la version Android de la box, tu auras soit une connexion simple en 5555, soit un système avec code d’appairage. Android permet le débogage via USB ou Wi-Fi avec ADB. (Android Developers)


Méthode A — Connexion ADB classique

Utilise cette méthode si la box affiche seulement son IP.

Exemple :

adb connect 192.168.1.50:5555
adb devices

Si la box apparaît dans la liste :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

Lancer l’application :

adb shell monkey -p ma.tkgraph.xtreamtv 1


Méthode B — Connexion avec code d’appairage

Sur certaines Google TV récentes, tu verras :

Adresse IP + port d’appairage
Code d’appairage

Commande :

adb pair 192.168.1.50:37123

Entre le code affiché sur la TV.

Ensuite connecte-toi au port ADB normal affiché par la box :

adb connect 192.168.1.50:42195
adb devices

Puis installe l’APK :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

Lancer l’app :

adb shell monkey -p ma.tkgraph.xtreamtv 1


6. Commande complète rapide

Quand tout est déjà configuré :

cd D:\07-Logiciels\03-FIN65\xtream-google-tv-player

.\gradlew.bat clean :app:assembleDebug

adb connect 192.168.1.50:5555

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

adb shell monkey -p ma.tkgraph.xtreamtv 1

Remplace :

192.168.1.50

par l’adresse IP réelle de ta box.


7. Désinstaller l’application si besoin

adb uninstall ma.tkgraph.xtreamtv

Puis réinstaller :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"


8. Voir les logs en cas de bug

adb logcat | findstr Xtream

Ou logs Android complets :

adb logcat


9. Créer une APK release

Pour une APK release non signée :

.\gradlew.bat :app:assembleRelease

Chemin probable :

app\build\outputs\apk\release\app-release-unsigned.apk

Pour une installation directe sur ta box, utilise plutôt l’APK debug :

app-debug.apk

Elle est déjà signée automatiquement pour les tests. La release propre servira plus tard pour une distribution sérieuse, donc quand on arrêtera de vivre comme des développeurs qui installent tout à la main par Wi-Fi.


you asked

message time: 2026-06-10 19:15:48

voila ce que j'ai


chatgpt response

Parfait. D’après tes captures, tu as déjà l’essentiel :

Android SDK Platform 36.1 installé
Android SDK Build-Tools installé
Android SDK Platform-Tools installé
Command-line Tools installé
Android Emulator installé
Java disponible via Android Studio / PyCharm
Le projet est ici :

D:\07-Logiciels\11-IPTV Andoid TV 2

Le dossier correct est celui qui contient :

app
gradle
build.gradle.kts
settings.gradle.kts
README

Donc ne rentre pas dans le dossier xtream-google-tv-player à l’intérieur, sauf si c’est une deuxième copie. Oui, le zip s’est visiblement installé comme une poupée russe inutile, la poésie de Windows.


1. Ouvre PowerShell dans le bon dossier

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

Vérifie que tu es au bon endroit :

dir

Tu dois voir :

app
gradle
build.gradle.kts
settings.gradle.kts


2. Configurer Java avec Android Studio

Tu as Java ici :

D:\Program Files\Android\Android Studio\jbr\bin\java.exe

Donc dans PowerShell :

$env:JAVA_HOME = "D:\Program Files\Android\Android Studio\jbr"
$env:Path = "$env:JAVA_HOME\bin;$env:Path"

Teste :

java -version

Tu dois obtenir une version Java/JDK, idéalement 17 ou plus.


3. Configurer ADB

Ton SDK est sûrement ici :

$env:ANDROID_HOME = "$env:LOCALAPPDATA\Android\Sdk"
$env:Path = "$env:ANDROID_HOME\platform-tools;$env:ANDROID_HOME\cmdline-tools\latest\bin;$env:Path"

Teste :

adb version

Si ça répond avec une version ADB, c’est bon.


4. Vérifier si gradlew.bat existe

Dans ton dossier projet, tape :

dir gradlew.bat

Si gradlew.bat existe

Passe directement à la compilation :

.\gradlew.bat clean
.\gradlew.bat :app:assembleDebug

Si gradlew.bat n’existe pas

Installe Gradle :

winget install Gradle.Gradle

Ferme PowerShell, rouvre-le, puis retourne dans le dossier :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

Remets Java :

$env:JAVA_HOME = "D:\Program Files\Android\Android Studio\jbr"
$env:Path = "$env:JAVA_HOME\bin;$env:Path"

Puis crée le wrapper Gradle :

gradle wrapper --gradle-version 9.1.0

Ensuite compile :

.\gradlew.bat clean
.\gradlew.bat :app:assembleDebug


5. Emplacement de l’APK générée

Après compilation, ton APK sera ici :

.\app\build\outputs\apk\debug\app-debug.apk

Vérifie avec :

dir ".\app\build\outputs\apk\debug\"


6. Activer ADB sur la box Google TV

Sur ta box :

Paramètres
> Système
> À propos
> Version / Build
> Clique 7 fois

Puis :

Paramètres
> Système
> Options pour les développeurs
> Débogage USB ou Débogage sans fil

Sur Google TV récente, il y a souvent Débogage sans fil avec code d’appairage.


7. Connecter la box en Wi-Fi avec ADB

Méthode avec appairage

Sur la TV, ouvre :

Débogage sans fil
> Associer avec un code

Tu verras :

Adresse IP : 192.168.1.xx
Port d’appairage : 37xxx
Code : 123456

Sur ton PC :

adb pair 192.168.1.xx:37xxx

Entre le code affiché sur la TV.

Ensuite connecte-toi au port ADB normal affiché dans l’écran du débogage sans fil :

adb connect 192.168.1.xx:xxxxx

Vérifie :

adb devices

Tu dois voir un appareil en mode :

device


8. Installer l’APK dans la box

Depuis le dossier du projet :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

Si tout va bien :

Success

La civilisation tient encore debout, brièvement.


9. Lancer l’application

Essaie d’abord :

adb shell monkey -p ma.tkgraph.xtreamtv 1

Si ça ne lance rien, liste les packages :

adb shell pm list packages | findstr xtream

Puis lance avec le package trouvé.


10. Commandes complètes à copier-coller

Adapte seulement l’adresse IP de ta box.

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

$env:JAVA_HOME = "D:\Program Files\Android\Android Studio\jbr"
$env:ANDROID_HOME = "$env:LOCALAPPDATA\Android\Sdk"
$env:Path = "$env:JAVA_HOME\bin;$env:ANDROID_HOME\platform-tools;$env:ANDROID_HOME\cmdline-tools\latest\bin;$env:Path"

java -version
adb version

.\gradlew.bat clean
.\gradlew.bat :app:assembleDebug

adb connect 192.168.1.xx:xxxxx
adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"
adb shell monkey -p ma.tkgraph.xtreamtv 1


11. Si tu as une erreur Gradle

Lance :

.\gradlew.bat --version

Puis :

.\gradlew.bat :app:assembleDebug --stacktrace

L’erreur importante sera en bas. Pas les 300 lignes où Gradle raconte sa vie comme s’il écrivait ses mémoires.


you asked

message time: 2026-06-10 19:19:49

PS D:\07-Logiciels\11-IPTV Andoid TV 2> cd "D:\07-Logiciels\11-IPTV Andoid TV 2"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> dir

Directory: D:\07-Logiciels\11-IPTV Andoid TV 2

Mode                 LastWriteTime         Length Name


d-----        10/06/2026     18:32                app
d-----        10/06/2026     18:32                gradle
d-----        10/06/2026     19:10                xtream-google-tv-player
-a----        10/06/2026     18:32             67 .gitignore
-a----        10/06/2026     18:32            170 build.gradle.kts
-a----        10/06/2026     18:32           3539 README.md
-a----        10/06/2026     18:32            340 settings.gradle.kts

PS D:\07-Logiciels\11-IPTV Andoid TV 2> D:\Program Files\Android\Android Studio\jbr\bin\java.exe
D:\Program : The term 'D:\Program' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the
path is correct and try again.
At line:1 char:1

D:\Program Files\Android\Android Studio\jbr\bin\java.exe
  + CategoryInfo          : ObjectNotFound: (D:\Program:String) [], CommandNotFoundException
  + FullyQualifiedErrorId : CommandNotFoundException

PS D:\07-Logiciels\11-IPTV Andoid TV 2> 'D:\Program Files\Android\Android Studio\jbr\bin\java.exe'
D:\Program Files\Android\Android Studio\jbr\bin\java.exe
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $env:JAVA_HOME = "D:\Program Files\Android\Android Studio\jbr"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $env:Path = "$env:JAVA_HOME\bin;$env:Path"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> java -version
openjdk version "21.0.10" 2026-01-20
OpenJDK Runtime Environment (build 21.0.10+-14961533-b1163.108)
OpenJDK 64-Bit Server VM (build 21.0.10+-14961533-b1163.108, mixed mode)
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $env:ANDROID_HOME = "$env:LOCALAPPDATA\Android\Sdk"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $env:Path = "$env:ANDROID_HOME\platform-tools;$env:ANDROID_HOME\cmdline-tools\latest\bin;$env:Path"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> adb version
Android Debug Bridge version 1.0.41
Version 37.0.0-14910828
Installed as C:\Users\abmou\AppData\Local\Android\Sdk\platform-tools\adb.exe
Running on Windows 10.0.26200
PS D:\07-Logiciels\11-IPTV Andoid TV 2> dir gradlew.bat
dir : Cannot find path 'D:\07-Logiciels\11-IPTV Andoid TV 2\gradlew.bat' because it does not exist.
At line:1 char:1

dir gradlew.bat
  + CategoryInfo          : ObjectNotFound: (D:\07-Logiciels...V 2\gradlew.bat:String) [Get-ChildItem], ItemNotFoundException
  + FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetChildItemCommand

PS D:\07-Logiciels\11-IPTV Andoid TV 2> winget install Gradle.Gradle
The msstore source requires that you view the following agreements before using.
Terms of Transaction: https://aka.ms/microsoft-store-terms-of-transaction
The source requires the current machine's 2-letter geographic region to be sent to the backend service to function properly (ex. "US").

Do you agree to all the source agreements terms?
[Y] Yes  [N] No: y
No package found matching input criteria.
PS D:\07-Logiciels\11-IPTV Andoid TV 2> winget install Gradle.Gradle
No package found matching input criteria.
PS D:\07-Logiciels\11-IPTV Andoid TV 2>

Powershell réouvert  : 
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved.

Install the latest PowerShell for new features and improvements! https://aka.ms/PSWindows

PS C:\WINDOWS\system32> cd "D:\07-Logiciels\11-IPTV Andoid TV 2"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $env:JAVA_HOME = "D:\Program Files\Android\Android Studio\jbr"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $env:Path = "$env:JAVA_HOME\bin;$env:Path"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> gradle wrapper --gradle-version 9.1.0
gradle : The term 'gradle' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1

gradle wrapper --gradle-version 9.1.0
  + CategoryInfo          : ObjectNotFound: (gradle:String) [], CommandNotFoundException
  + FullyQualifiedErrorId : CommandNotFoundException

PS D:\07-Logiciels\11-IPTV Andoid TV 2>


chatgpt response

Tu es presque prêt. Le problème est simple : Java fonctionne, ADB fonctionne, mais Gradle n’est pas installé et le projet n’a pas encore gradlew.bat.

Donc PowerShell te dit littéralement : “gradle ? connais pas.” Très utile, comme toujours.


1. Petite correction Java

Cette commande ne marche pas à cause des espaces dans Program Files :

D:\Program Files\Android\Android Studio\jbr\bin\java.exe

Pour exécuter un chemin avec espaces dans PowerShell, il faut utiliser & :

& "D:\Program Files\Android\Android Studio\jbr\bin\java.exe" -version

Mais tu as déjà bien configuré Java ensuite :

java -version

Et ça répond :

openjdk version "21.0.10"

Donc Java est OK.


2. Le vrai blocage

Cette erreur :

gradle : The term 'gradle' is not recognized

veut dire :

Gradle n’est pas installé ou pas dans le PATH.

Et comme winget install Gradle.Gradle ne trouve rien, on va faire plus fiable : installer Gradle manuellement avec PowerShell.


3. Installer Gradle manuellement

Copie-colle ce bloc complet dans PowerShell :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

$gradleVersion = "9.1.0"
$gradleInstallDir = "D:\Tools\Gradle"
$gradleZip = "$env:TEMP\gradle-$gradleVersion-bin.zip"

New-Item -ItemType Directory -Force -Path $gradleInstallDir

Invoke-WebRequest `
  -Uri "https://services.gradle.org/distributions/gradle-$gradleVersion-bin.zip" `
  -OutFile $gradleZip

Expand-Archive -Path $gradleZip -DestinationPath $gradleInstallDir -Force

$env:Path = "$gradleInstallDir\gradle-$gradleVersion\bin;$env:Path"

gradle -v

Si tout est bon, tu dois voir une réponse avec :

Gradle 9.1.0


4. Configurer Java + Android SDK

Toujours dans PowerShell :

$env:JAVA_HOME = "D:\Program Files\Android\Android Studio\jbr"
$env:ANDROID_HOME = "$env:LOCALAPPDATA\Android\Sdk"

$env:Path = "$env:JAVA_HOME\bin;$env:ANDROID_HOME\platform-tools;$env:ANDROID_HOME\cmdline-tools\latest\bin;D:\Tools\Gradle\gradle-9.1.0\bin;$env:Path"

java -version
adb version
gradle -v

Tu dois avoir les 3 commandes qui répondent.


5. Créer gradlew.bat

Maintenant, dans ton dossier projet :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

gradle wrapper --gradle-version 9.1.0 --distribution-type bin

Ensuite vérifie :

dir gradlew.bat

Tu dois voir :

gradlew.bat

Si ce fichier apparaît, la bête respire.


6. Compiler l’APK debug

Maintenant utilise le wrapper du projet :

.\gradlew.bat clean
.\gradlew.bat :app:assembleDebug

L’APK sera ici :

.\app\build\outputs\apk\debug\app-debug.apk

Vérifie :

dir ".\app\build\outputs\apk\debug\"


7. Commande complète à copier-coller

Tu peux utiliser ce bloc complet :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

$env:JAVA_HOME = "D:\Program Files\Android\Android Studio\jbr"
$env:ANDROID_HOME = "$env:LOCALAPPDATA\Android\Sdk"
$env:Path = "$env:JAVA_HOME\bin;$env:ANDROID_HOME\platform-tools;$env:ANDROID_HOME\cmdline-tools\latest\bin;D:\Tools\Gradle\gradle-9.1.0\bin;$env:Path"

java -version
adb version
gradle -v

gradle wrapper --gradle-version 9.1.0 --distribution-type bin

.\gradlew.bat clean
.\gradlew.bat :app:assembleDebug


8. Si le téléchargement Gradle bloque

Si Invoke-WebRequest échoue, essaie cette version :

[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12

Invoke-WebRequest `
  -Uri "https://services.gradle.org/distributions/gradle-9.1.0-bin.zip" `
  -OutFile "$env:TEMP\gradle-9.1.0-bin.zip"

Puis :

Expand-Archive -Path "$env:TEMP\gradle-9.1.0-bin.zip" -DestinationPath "D:\Tools\Gradle" -Force
$env:Path = "D:\Tools\Gradle\gradle-9.1.0\bin;$env:Path"
gradle -v


9. Installer l’APK sur la box après compilation

Quand l’APK existe, connecte ta box :

adb devices

Si elle est en Wi-Fi :

adb connect 192.168.1.xx:xxxxx

Puis installe :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

Lance l’application :

adb shell monkey -p ma.tkgraph.xtreamtv 1


10. Si tu as une erreur à la compilation

Lance cette commande :

.\gradlew.bat :app:assembleDebug --stacktrace

Et récupère surtout les 20 dernières lignes. Pas tout le roman Gradle, sinon on va finir par lire sa biographie non autorisée.


you asked

message time: 2026-06-10 19:23:58

Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved.

Install the latest PowerShell for new features and improvements! https://aka.ms/PSWindows

PS C:\WINDOWS\system32> cd "D:\07-Logiciels\11-IPTV Andoid TV 2"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $env:JAVA_HOME = "D:\Program Files\Android\Android Studio\jbr"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $env:Path = "$env:JAVA_HOME\bin;$env:Path"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> gradle wrapper --gradle-version 9.1.0
gradle : The term 'gradle' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1

gradle wrapper --gradle-version 9.1.0
  + CategoryInfo          : ObjectNotFound: (gradle:String) [], CommandNotFoundException
  + FullyQualifiedErrorId : CommandNotFoundException

PS D:\07-Logiciels\11-IPTV Andoid TV 2> & "D:\Program Files\Android\Android Studio\jbr\bin\java.exe" -version
openjdk version "21.0.10" 2026-01-20
OpenJDK Runtime Environment (build 21.0.10+-14961533-b1163.108)                                                         OpenJDK 64-Bit Server VM (build 21.0.10+-14961533-b1163.108, mixed mode)                                                PS D:\07-Logiciels\11-IPTV Andoid TV 2> java -version                                                                   openjdk version "21.0.10" 2026-01-20                                                                                    OpenJDK Runtime Environment (build 21.0.10+-14961533-b1163.108)                                                         OpenJDK 64-Bit Server VM (build 21.0.10+-14961533-b1163.108, mixed mode)                                                PS D:\07-Logiciels\11-IPTV Andoid TV 2> cd "D:\07-Logiciels\11-IPTV Andoid TV 2"                                        PS D:\07-Logiciels\11-IPTV Andoid TV 2>
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $gradleVersion = "9.1.0"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $gradleInstallDir = "D:\Tools\Gradle"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $gradleZip = "$env:TEMP\gradle-$gradleVersion-bin.zip"
PS D:\07-Logiciels\11-IPTV Andoid TV 2>
PS D:\07-Logiciels\11-IPTV Andoid TV 2> New-Item -ItemType Directory -Force -Path $gradleInstallDir

Directory: D:\Tools

Mode                 LastWriteTime         Length Name


d-----        10/06/2026     19:22                Gradle

PS D:\07-Logiciels\11-IPTV Andoid TV 2>
PS D:\07-Logiciels\11-IPTV Andoid TV 2> Invoke-WebRequest `

  -Uri "https://services.gradle.org/distributions/gradle-$gradleVersion-bin.zip" `
  -OutFile $gradleZip
PS D:\07-Logiciels\11-IPTV Andoid TV 2>
PS D:\07-Logiciels\11-IPTV Andoid TV 2> Expand-Archive -Path $gradleZip -DestinationPath $gradleInstallDir -Force
PS D:\07-Logiciels\11-IPTV Andoid TV 2>
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $env:Path = "$gradleInstallDir\gradle-$gradleVersion\bin;$env:Path"
PS D:\07-Logiciels\11-IPTV Andoid TV 2>
PS D:\07-Logiciels\11-IPTV Andoid TV 2> gradle -v





Welcome to Gradle 9.1.0!

Here are the highlights of this release:

Full Java 25 support
Native task graph visualization
Enhanced console output

For more details see https://docs.gradle.org/9.1.0/release-notes.html


Gradle 9.1.0

Build time:    2025-09-18 13:05:56 UTC
Revision:      e45a8dbf2470c2e2474ccc25be9f49331406a07e

Kotlin:        2.2.0
Groovy:        4.0.28
Ant:           Apache Ant(TM) version 1.10.15 compiled on August 25 2024
Launcher JVM:  21.0.10 (JetBrains s.r.o. 21.0.10+-14961533-b1163.108)
Daemon JVM:    D:\Program Files\Android\Android Studio\jbr (no JDK specified, using current Java home)
OS:            Windows 11 10.0 amd64

PS D:\07-Logiciels\11-IPTV Andoid TV 2> $env:JAVA_HOME = "D:\Program Files\Android\Android Studio\jbr"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $env:ANDROID_HOME = "$env:LOCALAPPDATA\Android\Sdk"
PS D:\07-Logiciels\11-IPTV Andoid TV 2>
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $env:Path = "$env:JAVA_HOME\bin;$env:ANDROID_HOME\platform-tools;$env:ANDROID_HOME\cmdline-tools\latest\bin;D:\Tools\Gradle\gradle-9.1.0\bin;$env:Path"
PS D:\07-Logiciels\11-IPTV Andoid TV 2>
PS D:\07-Logiciels\11-IPTV Andoid TV 2> java -version
openjdk version "21.0.10" 2026-01-20
OpenJDK Runtime Environment (build 21.0.10+-14961533-b1163.108)
OpenJDK 64-Bit Server VM (build 21.0.10+-14961533-b1163.108, mixed mode)
PS D:\07-Logiciels\11-IPTV Andoid TV 2> adb version
Android Debug Bridge version 1.0.41
Version 37.0.0-14910828
Installed as C:\Users\abmou\AppData\Local\Android\Sdk\platform-tools\adb.exe
Running on Windows 10.0.26200
PS D:\07-Logiciels\11-IPTV Andoid TV 2> gradle -v


Gradle 9.1.0

Build time:    2025-09-18 13:05:56 UTC
Revision:      e45a8dbf2470c2e2474ccc25be9f49331406a07e

Kotlin:        2.2.0
Groovy:        4.0.28
Ant:           Apache Ant(TM) version 1.10.15 compiled on August 25 2024
Launcher JVM:  21.0.10 (JetBrains s.r.o. 21.0.10+-14961533-b1163.108)
Daemon JVM:    D:\Program Files\Android\Android Studio\jbr (no JDK specified, using current Java home)
OS:            Windows 11 10.0 amd64

PS D:\07-Logiciels\11-IPTV Andoid TV 2> cd "D:\07-Logiciels\11-IPTV Andoid TV 2"
PS D:\07-Logiciels\11-IPTV Andoid TV 2>
PS D:\07-Logiciels\11-IPTV Andoid TV 2> gradle wrapper --gradle-version 9.1.0 --distribution-type bin
Starting a Gradle Daemon, 1 incompatible Daemon could not be reused, use --status for details

FAILURE: Build failed with an exception.

Where:
Build file 'D:\07-Logiciels\11-IPTV Andoid TV 2\app\build.gradle.kts' line: 1


What went wrong:
An exception occurred applying plugin request [id: 'org.jetbrains.kotlin.android', version: '2.4.0']

Failed to apply plugin 'org.jetbrains.kotlin.android'.
Failed to apply plugin 'org.jetbrains.kotlin.android'
   The 'org.jetbrains.kotlin.android' plugin is no longer required for Kotlin support since AGP 9.0.
   Solution: Remove the 'org.jetbrains.kotlin.android' plugin from this project's build file: app\build.gradle.kts.
   See https://kotl.in/gradle/agp-built-in-kotlin for more details.
java.lang.Throwable (no error message)




Try:

Run with --stacktrace option to get the stack trace.
Run with --info or --debug option to get more log output.
Run with --scan to generate a Build Scan (Powered by Develocity).
Get more help at https://help.gradle.org.

BUILD FAILED in 21s
PS D:\07-Logiciels\11-IPTV Andoid TV 2>


chatgpt response

Tu as fait correctement la partie environnement :

Java : OK
ADB : OK
Gradle 9.1.0 : OK
SDK Android : OK

Le blocage vient maintenant du projet que je t’ai fourni : dans app/build.gradle.kts, il y a encore le plugin :

alias(libs.plugins.kotlin.android)

Avec Android Gradle Plugin 9.0+, ce plugin ne doit plus être utilisé, car Kotlin est maintenant intégré directement dans AGP. Android recommande de supprimer ce plugin du fichier module, du fichier racine et du catalogue libs.versions.toml. Bref, le futur est arrivé, et il casse les anciens fichiers comme un stagiaire trop motivé. (Android Developers)


1. Corriger les fichiers Gradle

Copie-colle ce bloc complet dans PowerShell :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

# Supprimer le plugin Kotlin Android du build racine
(Get-Content ".\build.gradle.kts") |
Where-Object { $_ -notmatch "libs\.plugins\.kotlin\.android" } |
Set-Content ".\build.gradle.kts"

# Supprimer le plugin Kotlin Android du module app
(Get-Content ".\app\build.gradle.kts") |
Where-Object { $_ -notmatch "libs\.plugins\.kotlin\.android" } |
Set-Content ".\app\build.gradle.kts"

# Supprimer la déclaration du plugin Kotlin Android dans le catalogue de versions
(Get-Content ".\gradle\libs.versions.toml") |
Where-Object { $_ -notmatch "^kotlin-android\s*=" } |
Set-Content ".\gradle\libs.versions.toml"


2. Vérifier que les lignes ont bien disparu

Select-String -Path ".\build.gradle.kts" -Pattern "kotlin.android"
Select-String -Path ".\app\build.gradle.kts" -Pattern "kotlin.android"
Select-String -Path ".\gradle\libs.versions.toml" -Pattern "kotlin-android"

Si tout est bon, ces commandes ne doivent rien afficher.


3. Recréer le Gradle Wrapper

Maintenant relance :

gradle wrapper --gradle-version 9.1.0 --distribution-type bin

Vérifie que gradlew.bat existe :

dir gradlew.bat

Tu dois voir :

gradlew.bat


4. Compiler l’APK

Ensuite :

.\gradlew.bat clean
.\gradlew.bat :app:assembleDebug

L’APK sera ici :

.\app\build\outputs\apk\debug\app-debug.apk

Vérifie :

dir ".\app\build\outputs\apk\debug\"


5. Commandes complètes après correction

Quand les fichiers sont corrigés, tu peux utiliser ce bloc :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

$env:JAVA_HOME = "D:\Program Files\Android\Android Studio\jbr"
$env:ANDROID_HOME = "$env:LOCALAPPDATA\Android\Sdk"
$env:Path = "$env:JAVA_HOME\bin;$env:ANDROID_HOME\platform-tools;$env:ANDROID_HOME\cmdline-tools\latest\bin;D:\Tools\Gradle\gradle-9.1.0\bin;$env:Path"

gradle wrapper --gradle-version 9.1.0 --distribution-type bin

.\gradlew.bat clean
.\gradlew.bat :app:assembleDebug


6. Installer dans la box Google TV

Après compilation :

adb devices

Si ta box est déjà connectée, tu verras un appareil.

Sinon, avec l’IP de la box :

adb connect 192.168.1.xx:xxxxx

Puis installe l’APK :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

Lance l’application :

adb shell monkey -p ma.tkgraph.xtreamtv 1


7. Si une nouvelle erreur apparaît

Lance :

.\gradlew.bat :app:assembleDebug --stacktrace

Et récupère uniquement les 30 dernières lignes. Le reste, c’est Gradle qui récite son roman intérieur.


you asked

message time: 2026-06-10 19:26:41

PS D:\07-Logiciels\11-IPTV Andoid TV 2> cd "D:\07-Logiciels\11-IPTV Andoid TV 2"
PS D:\07-Logiciels\11-IPTV Andoid TV 2>
PS D:\07-Logiciels\11-IPTV Andoid TV 2> # Supprimer le plugin Kotlin Android du build racine
PS D:\07-Logiciels\11-IPTV Andoid TV 2> (Get-Content ".\build.gradle.kts") |

Where-Object { $_ -notmatch "libs.plugins.kotlin.android" } |
Set-Content ".\build.gradle.kts"
PS D:\07-Logiciels\11-IPTV Andoid TV 2>
PS D:\07-Logiciels\11-IPTV Andoid TV 2> # Supprimer le plugin Kotlin Android du module app
PS D:\07-Logiciels\11-IPTV Andoid TV 2> (Get-Content ".\app\build.gradle.kts") |
Where-Object { $_ -notmatch "libs.plugins.kotlin.android" } |
Set-Content ".\app\build.gradle.kts"
PS D:\07-Logiciels\11-IPTV Andoid TV 2>
PS D:\07-Logiciels\11-IPTV Andoid TV 2> # Supprimer la déclaration du plugin Kotlin Android dans le catalogue de versions
PS D:\07-Logiciels\11-IPTV Andoid TV 2> (Get-Content ".\gradle\libs.versions.toml") |
Where-Object { $_ -notmatch "^kotlin-android\s*=" } |
Set-Content ".\gradle\libs.versions.toml"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> Select-String -Path ".\build.gradle.kts" -Pattern "kotlin.android"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> Select-String -Path ".\app\build.gradle.kts" -Pattern "kotlin.android"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> Select-String -Path ".\gradle\libs.versions.toml" -Pattern "kotlin-android"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> gradle wrapper --gradle-version 9.1.0 --distribution-type bin





BUILD SUCCESSFUL in 6s
1 actionable task: 1 executed
Consider enabling configuration cache to speed up this build: https://docs.gradle.org/9.1.0/userguide/configuration_cache_enabling.html
PS D:\07-Logiciels\11-IPTV Andoid TV 2> dir gradlew.bat

Directory: D:\07-Logiciels\11-IPTV Andoid TV 2

Mode                 LastWriteTime         Length Name


-a----        10/06/2026     19:25           2896 gradlew.bat

PS D:\07-Logiciels\11-IPTV Andoid TV 2> .\gradlew.bat clean
Downloading https://services.gradle.org/distributions/gradle-9.1.0-bin.zip
............10%.............20%.............30%.............40%.............50%............60%.............70%.............80%.............90%.............100%

BUILD SUCCESSFUL in 9s
1 actionable task: 1 up-to-date
Consider enabling configuration cache to speed up this build: https://docs.gradle.org/9.1.0/userguide/configuration_cache_enabling.html
PS D:\07-Logiciels\11-IPTV Andoid TV 2> .\gradlew.bat :app:assembleDebug

FAILURE: Build failed with an exception.

What went wrong:
Could not determine the dependencies of task ':app:packageDebug'.

Could not create task ':app:compileDebugJavaWithJavac'.
Failed to calculate the value of task ':app:compileDebugJavaWithJavac' property 'javaCompiler'.
Cannot find a Java installation on your machine (Windows 11 10.0 amd64) matching: {languageVersion=17, vendor=any vendor, implementation=vendor-specific, nativeImageCapable=false}. Toolchain download repositories have not been configured.




Try:

Learn more about toolchain auto-detection and auto-provisioning at https://docs.gradle.org/9.1.0/userguide/toolchains.html#sec:auto_detection.
Learn more about toolchain repositories at https://docs.gradle.org/9.1.0/userguide/toolchains.html#sub:download_repositories.
Run with --stacktrace option to get the stack trace.
Run with --info or --debug option to get more log output.
Run with --scan to generate a Build Scan (Powered by Develocity).
Get more help at https://help.gradle.org.

BUILD FAILED in 987ms
PS D:\07-Logiciels\11-IPTV Andoid TV 2>


chatgpt response

Très bien, on avance. Là, Gradle Wrapper est créé, donc la partie pénible est passée. Le nouveau problème est clair :

Cannot find a Java installation matching: languageVersion=17

Ton projet demande explicitement un JDK 17, mais ta machine utilise :

Java 21

Donc Gradle cherche Java 17, ne le trouve pas, et s’effondre comme un meuble en kit monté sans notice.

Le plus simple : on supprime la demande forcée de JDK 17 dans app/build.gradle.kts, tout en gardant la compilation compatible Java 17.


1. Supprimer le bloc kotlin { jvmToolchain(17) }

Copie-colle ceci dans PowerShell :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

$content = Get-Content ".\app\build.gradle.kts" -Raw
$content = $content -replace '(?s)\s*kotlin\s*\{\s*jvmToolchain$17$\s*\}', ''
Set-Content ".\app\build.gradle.kts" $content


2. Vérifier que le bloc a disparu

Select-String -Path ".\app\build.gradle.kts" -Pattern "jvmToolchain"

Si rien ne s’affiche, c’est bon.


3. Nettoyer et recompiler

.\gradlew.bat clean
.\gradlew.bat :app:assembleDebug


4. Si tu veux faire tout d’un coup

Copie-colle ce bloc complet :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

$env:JAVA_HOME = "D:\Program Files\Android\Android Studio\jbr"
$env:ANDROID_HOME = "$env:LOCALAPPDATA\Android\Sdk"
$env:Path = "$env:JAVA_HOME\bin;$env:ANDROID_HOME\platform-tools;$env:ANDROID_HOME\cmdline-tools\latest\bin;D:\Tools\Gradle\gradle-9.1.0\bin;$env:Path"

$content = Get-Content ".\app\build.gradle.kts" -Raw
$content = $content -replace '(?s)\s*kotlin\s*\{\s*jvmToolchain$17$\s*\}', ''
Set-Content ".\app\build.gradle.kts" $content

.\gradlew.bat clean
.\gradlew.bat :app:assembleDebug


5. Résultat attendu

Si la compilation réussit, tu dois voir :

BUILD SUCCESSFUL

L’APK sera ici :

D:\07-Logiciels\11-IPTV Andoid TV 2\app\build\outputs\apk\debug\app-debug.apk

Vérifie :

dir ".\app\build\outputs\apk\debug\"


6. Ensuite installation sur la box

Quand l’APK existe :

adb devices

Puis, si ta box est en Wi-Fi :

adb connect 192.168.1.xx:xxxxx

Installe :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

Lance l’app :

adb shell monkey -p ma.tkgraph.xtreamtv 1


7. Si une autre erreur apparaît

Lance :

.\gradlew.bat :app:assembleDebug --stacktrace

Et récupère les 30 dernières lignes. Le reste, c’est Gradle qui fait du théâtre administratif.


you asked

message time: 2026-06-10 19:51:35

PS D:\07-Logiciels\11-IPTV Andoid TV 2> dir gradlew.bat

Directory: D:\07-Logiciels\11-IPTV Andoid TV 2

Mode                 LastWriteTime         Length Name


-a----        10/06/2026     19:25           2896 gradlew.bat

PS D:\07-Logiciels\11-IPTV Andoid TV 2> .\gradlew.bat clean
Downloading https://services.gradle.org/distributions/gradle-9.1.0-bin.zip
............10%.............20%.............30%.............40%.............50%............60%.............70%.............80%.............90%.............100%

BUILD SUCCESSFUL in 9s
1 actionable task: 1 up-to-date
Consider enabling configuration cache to speed up this build: https://docs.gradle.org/9.1.0/userguide/configuration_cache_enabling.html
PS D:\07-Logiciels\11-IPTV Andoid TV 2> .\gradlew.bat :app:assembleDebug

FAILURE: Build failed with an exception.

What went wrong:
Could not determine the dependencies of task ':app:packageDebug'.

Could not create task ':app:compileDebugJavaWithJavac'.
Failed to calculate the value of task ':app:compileDebugJavaWithJavac' property 'javaCompiler'.
Cannot find a Java installation on your machine (Windows 11 10.0 amd64) matching: {languageVersion=17, vendor=any vendor, implementation=vendor-specific, nativeImageCapable=false}. Toolchain download repositories have not been configured.




Try:

Learn more about toolchain auto-detection and auto-provisioning at https://docs.gradle.org/9.1.0/userguide/toolchains.html#sec:auto_detection.
Learn more about toolchain repositories at https://docs.gradle.org/9.1.0/userguide/toolchains.html#sub:download_repositories.
Run with --stacktrace option to get the stack trace.
Run with --info or --debug option to get more log output.
Run with --scan to generate a Build Scan (Powered by Develocity).
Get more help at https://help.gradle.org.

BUILD FAILED in 987ms
PS D:\07-Logiciels\11-IPTV Andoid TV 2> cd "D:\07-Logiciels\11-IPTV Andoid TV 2"
PS D:\07-Logiciels\11-IPTV Andoid TV 2>
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $content = Get-Content ".\app\build.gradle.kts" -Raw
PS D:\07-Logiciels\11-IPTV Andoid TV 2> $content = $content -replace '(?s)\skotlin\s{\sjvmToolchain$17$\s}', ''
PS D:\07-Logiciels\11-IPTV Andoid TV 2> Set-Content ".\app\build.gradle.kts" $content
PS D:\07-Logiciels\11-IPTV Andoid TV 2> Select-String -Path ".\app\build.gradle.kts" -Pattern "jvmToolchain"
PS D:\07-Logiciels\11-IPTV Andoid TV 2> .\gradlew.bat clean

BUILD SUCCESSFUL in 1s
1 actionable task: 1 up-to-date
Consider enabling configuration cache to speed up this build: https://docs.gradle.org/9.1.0/userguide/configuration_cache_enabling.html
PS D:\07-Logiciels\11-IPTV Andoid TV 2> .\gradlew.bat :app:assembleDebug
The Daemon will expire immediately since the JVM garbage collector is thrashing.
The project memory settings are likely not configured or are configured to an insufficient value.
The memory settings for this project must be adjusted to avoid this failure.
These settings can be adjusted by setting 'org.gradle.jvmargs' in 'gradle.properties'.
The currently configured max heap space is '512 MiB' and the configured max metaspace is '384 MiB'.
For more information on how to set these values, please refer to https://docs.gradle.org/9.1.0/userguide/build_environment.html#sec:configuring_jvm_memory in the Gradle documentation.
To disable this warning, set 'org.gradle.daemon.performance.disable-logging=true'.
Daemon is stopping immediately since the JVM garbage collector is thrashing

FAILURE: Build failed with an exception.

What went wrong:
Gradle build daemon has been stopped: since the JVM garbage collector is thrashing


Try:

Run with --stacktrace option to get the stack trace.
Run with --info or --debug option to get more log output.
Run with --scan to generate a Build Scan (Powered by Develocity).
Get more help at https://help.gradle.org.
PS D:\07-Logiciels\11-IPTV Andoid TV 2>


chatgpt response

Bon, cette fois ce n’est plus Kotlin, ni Java, ni ADB. C’est Gradle qui manque de mémoire :

currently configured max heap space is '512 MiB'
Gradle build daemon has been stopped

512 Mo pour compiler Android en 2026, c’est à peu près comme vouloir faire tourner Photoshop sur une calculatrice. On va lui donner plus de RAM.


1. Fermer ce qui consomme beaucoup

Avant de relancer :

ferme l’émulateur Android si ouvert ;
ferme Android Studio temporairement ;
ferme Chrome si tu as 47 onglets ouverts comme tout être humain mal encadré.

Ensuite reste dans PowerShell.


2. Créer / corriger gradle.properties

Copie-colle exactement ceci :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

.\gradlew.bat --stop

$gradleProperties = @"
org.gradle.jvmargs=-Xmx4096m -XX:MaxMetaspaceSize=1024m -Dfile.encoding=UTF-8 -XX:+UseG1GC
org.gradle.parallel=false
org.gradle.configuration-cache=false
android.useAndroidX=true
"@

[System.IO.File]::WriteAllText(
    "D:\07-Logiciels\11-IPTV Andoid TV 2\gradle.properties",
    $gradleProperties,
    [System.Text.UTF8Encoding]::new($false)
)


3. Vérifier le fichier

type ".\gradle.properties"

Tu dois voir :

org.gradle.jvmargs=-Xmx4096m -XX:MaxMetaspaceSize=1024m -Dfile.encoding=UTF-8 -XX:+UseG1GC
org.gradle.parallel=false
org.gradle.configuration-cache=false
android.useAndroidX=true


4. Relancer la compilation sans daemon

Utilise cette commande :

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon


5. Si ton PC manque de RAM

Si ça bloque encore, baisse à 2 Go au lieu de 4 Go :

$gradleProperties = @"
org.gradle.jvmargs=-Xmx2048m -XX:MaxMetaspaceSize=768m -Dfile.encoding=UTF-8 -XX:+UseG1GC
org.gradle.parallel=false
org.gradle.configuration-cache=false
android.useAndroidX=true
"@

[System.IO.File]::WriteAllText(
    "D:\07-Logiciels\11-IPTV Andoid TV 2\gradle.properties",
    $gradleProperties,
    [System.Text.UTF8Encoding]::new($false)
)

Puis :

.\gradlew.bat --stop
.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon


6. Si la compilation réussit

Tu dois voir :

BUILD SUCCESSFUL

L’APK sera ici :

.\app\build\outputs\apk\debug\app-debug.apk

Vérifie :

dir ".\app\build\outputs\apk\debug\"


7. Installer sur la box ensuite

Quand l’APK existe :

adb devices

Puis :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

Lancer l’application :

adb shell monkey -p ma.tkgraph.xtreamtv 1


Lance d’abord la correction mémoire avec 4096m. Si l’erreur suivante apparaît, envoie uniquement le bloc à partir de FAILURE: Build failed, pas toute la tragédie administrative de Gradle.


chatgpt response

Ça y est : la compilation a réussi. Dans ton log, malgré les avertissements D8/R8 qui font leur petit spectacle dramatique, la ligne importante est bien :

BUILD SUCCESSFUL in 47s
36 actionable tasks: 36 executed

Donc l’APK debug a normalement été créé. Les warnings Kotlin/D8 sont bruyants, mais pas bloquants ici. Gradle adore faire peur aux gens, probablement par vocation administrative. 


1. Vérifier que l’APK existe

Dans PowerShell :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

dir ".\app\build\outputs\apk\debug\"

Tu dois voir un fichier comme :

app-debug.apk

Chemin complet :

D:\07-Logiciels\11-IPTV Andoid TV 2\app\build\outputs\apk\debug\app-debug.apk


2. Connecter la box Google TV

Si ta box est déjà connectée

Tape :

adb devices

Si tu vois un appareil avec :

device

c’est bon.


Si tu dois connecter en Wi-Fi

Sur la box Google TV :

Paramètres
> Système
> Options pour les développeurs
> Débogage sans fil

Puis depuis PowerShell :

adb connect 192.168.1.xx:xxxxx

Remplace par l’IP et le port affichés sur la box.

Vérifie :

adb devices


3. Installer l’APK sur la box

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

Si tout va bien :

Success


4. Lancer l’application

adb shell monkey -p ma.tkgraph.xtreamtv 1


5. Commandes complètes à copier-coller

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

adb devices

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

adb shell monkey -p ma.tkgraph.xtreamtv 1


6. Si l’installation échoue

Cas 1 : ancienne version déjà installée

adb uninstall ma.tkgraph.xtreamtv
adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

Cas 2 : version downgrade

adb install -r -d ".\app\build\outputs\apk\debug\app-debug.apk"

Cas 3 : appareil non autorisé

Si adb devices affiche :

unauthorized

regarde l’écran de la box et accepte l’autorisation ADB. Oui, même la télé veut une confirmation maintenant. Admirable époque.


7. Les warnings D8/R8

Tu peux les ignorer pour l’instant, car l’APK a été généré. Plus tard, on pourra nettoyer ça en alignant mieux :

Android Gradle Plugin ;
Compose ;
Kotlin intégré AGP ;
Media3 ;
dépendances TV.

Mais maintenant, l’étape suivante est simple : installer l’APK dans la box et tester l’ouverture de l’app.


you asked

message time: 2026-06-10 20:10:47

PS D:\07-Logiciels\11-IPTV Andoid TV 2> adb connect 192.168.1.124
failed to authenticate to 192.168.1.124:5555
PS D:\07-Logiciels\11-IPTV Andoid TV 2> adb connect 192.168.1.124
already connected to 192.168.1.124:5555
PS D:\07-Logiciels\11-IPTV Andoid TV 2> adb devices
List of devices attached
192.168.1.124:5555      device

PS D:\07-Logiciels\11-IPTV Andoid TV 2> adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"
Performing Streamed Install
Success
PS D:\07-Logiciels\11-IPTV Andoid TV 2>


chatgpt response

Parfait. L’APK est installé avec succès sur ta box Google TV.

La ligne importante :

Success

Donc là, l’application est bien dans la box. Petite victoire contre l’administration ADB, ce qui mérite presque une médaille en plastique.


1. Lancer l’application depuis PowerShell

Tape :

adb shell monkey -p ma.tkgraph.xtreamtv 1

Si l’app s’ouvre sur la TV, c’est bon.


2. Si elle ne s’ouvre pas

Vérifie d’abord que le package existe bien :

adb shell pm list packages | findstr xtream

Tu devrais voir :

package:ma.tkgraph.xtreamtv

Puis relance :

adb shell monkey -p ma.tkgraph.xtreamtv 1


3. Ouvrir depuis la box

Sur Google TV, va dans :

Applications
> Voir toutes les applications
> Xtream Google TV Player

Selon la box, l’application peut aussi apparaître dans :

Paramètres
> Applications
> Voir toutes les applications

Si elle n’apparaît pas directement sur l’accueil, c’est normal : certaines apps installées par ADB ne sont pas immédiatement mises en avant, parce que Google TV adore cacher les choses comme un meuble IKEA cache ses vis.


4. Tester l’application

Dans l’app, entre :

URL serveur : http://ton-serveur:port
Username : ton_identifiant
Password : ton_mot_de_passe

Exemple de format :

http://exemple.com:8080

Évite de mettre / à la fin de l’URL.

Correct :

http://exemple.com:8080

À éviter :

http://exemple.com:8080/


5. Voir les logs si l’app plante

Lance cette commande avant d’ouvrir l’app :

adb logcat | findstr xtream

Ou plus large :

adb logcat | findstr ma.tkgraph

Puis ouvre l’application :

adb shell monkey -p ma.tkgraph.xtreamtv 1


6. Si tu veux désinstaller / réinstaller

adb uninstall ma.tkgraph.xtreamtv
adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"


7. Commandes utiles maintenant

adb devices
adb shell monkey -p ma.tkgraph.xtreamtv 1
adb shell pm list packages | findstr xtream
adb logcat | findstr ma.tkgraph

Ton étape actuelle : lancer l’app et tester la connexion Xtream. Si l’écran s’ouvre, on passe ensuite à l’amélioration du design TV, favoris, catégories, EPG et zapping.


you asked

message time: 2026-06-10 20:12:46

je trouve l'appli, mais ouvrir est désactivée


chatgpt response

Ça veut dire que l’APK est bien installée, mais que Google TV ne voit probablement aucune activité lançable. Autrement dit : l’application existe, mais elle n’a pas de “porte d’entrée” déclarée correctement. Très moderne : une maison sans porte, mais avec un joli reçu d’installation.

On va corriger le AndroidManifest.xml.


1. Tester le lancement par ADB

Lance d’abord cette commande :

adb shell monkey -p ma.tkgraph.xtreamtv 1

Si tu vois une erreur du type :

No activities found to run

alors c’est bien le manifest qui est incomplet.

Teste aussi :

adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

Si cette commande ouvre l’app, alors l’activité existe, mais elle n’est pas bien déclarée pour le launcher TV.


2. Remplacer le manifest

Ouvre ce fichier :

D:\07-Logiciels\11-IPTV Andoid TV 2\app\src\main\AndroidManifest.xml

Remplace tout son contenu par ceci :

<manifest xmlns:android="http://schemas.android.com/apk/res/android">

    <uses-permission android:name="android.permission.INTERNET" />

    <uses-feature
        android:name="android.software.leanback"
        android:required="true" />

    <uses-feature
        android:name="android.hardware.touchscreen"
        android:required="false" />

    <application
        android:allowBackup="true"
        android:banner="@drawable/tv_banner"
        android:icon="@mipmap/ic_launcher"
        android:label="Xtream TV Player"
        android:supportsRtl="true"
        android:theme="@style/Theme.XtreamTv">

        <activity
            android:name=".MainActivity"
            android:exported="true">

            <intent-filter>
                <action android:name="android.intent.action.MAIN" />

                <category android:name="android.intent.category.LAUNCHER" />
                <category android:name="android.intent.category.LEANBACK_LAUNCHER" />
            </intent-filter>

        </activity>

    </application>

</manifest>

Le point important est ici :

<category android:name="android.intent.category.LAUNCHER" />
<category android:name="android.intent.category.LEANBACK_LAUNCHER" />

LEANBACK_LAUNCHER sert à Google TV / Android TV.
LAUNCHER aide certaines interfaces à activer le bouton Ouvrir. Parce qu’apparemment une seule catégorie n’était pas assez claire pour l’empire Android.


3. Correction rapide par PowerShell

Tu peux aussi remplacer le fichier directement avec PowerShell :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

$manifest = @"
<manifest xmlns:android="http://schemas.android.com/apk/res/android">

    <uses-permission android:name="android.permission.INTERNET" />

    <uses-feature
        android:name="android.software.leanback"
        android:required="true" />

    <uses-feature
        android:name="android.hardware.touchscreen"
        android:required="false" />

    <application
        android:allowBackup="true"
        android:banner="@drawable/tv_banner"
        android:icon="@mipmap/ic_launcher"
        android:label="Xtream TV Player"
        android:supportsRtl="true"
        android:theme="@style/Theme.XtreamTv">

        <activity
            android:name=".MainActivity"
            android:exported="true">

            <intent-filter>
                <action android:name="android.intent.action.MAIN" />

                <category android:name="android.intent.category.LAUNCHER" />
                <category android:name="android.intent.category.LEANBACK_LAUNCHER" />
            </intent-filter>

        </activity>

    </application>

</manifest>
"@

[System.IO.File]::WriteAllText(
    "D:\07-Logiciels\11-IPTV Andoid TV 2\app\src\main\AndroidManifest.xml",
    $manifest,
    [System.Text.UTF8Encoding]::new($false)
)


4. Recompiler l’APK

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon


5. Désinstaller l’ancienne version

Important : désinstalle l’ancienne app avant de réinstaller, sinon Google TV peut garder l’ancien état.

adb uninstall ma.tkgraph.xtreamtv


6. Réinstaller la nouvelle APK

adb install ".\app\build\outputs\apk\debug\app-debug.apk"


7. Lancer l’application

adb shell monkey -p ma.tkgraph.xtreamtv 1

Ou directement :

adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity


8. Vérifier l’activité lançable

Après installation, tape :

adb shell cmd package resolve-activity --brief ma.tkgraph.xtreamtv

Et aussi :

adb shell pm dump ma.tkgraph.xtreamtv | findstr MAIN
adb shell pm dump ma.tkgraph.xtreamtv | findstr LEANBACK
adb shell pm dump ma.tkgraph.xtreamtv | findstr LAUNCHER

Tu dois voir que MainActivity est bien associée à :

android.intent.action.MAIN
android.intent.category.LAUNCHER
android.intent.category.LEANBACK_LAUNCHER


Résumé

Ton installation est bonne. Le problème vient presque sûrement du manifest. Corrige-le, recompile, désinstalle, réinstalle.

Commande finale utile :

adb uninstall ma.tkgraph.xtreamtv
adb install ".\app\build\outputs\apk\debug\app-debug.apk"
adb shell monkey -p ma.tkgraph.xtreamtv 1


you asked

message time: 2026-06-10 20:18:47

PS D:\07-Logiciels\11-IPTV Andoid TV 2> adb shell monkey -p ma.tkgraph.xtreamtv 1
  bash arg: -p
  bash arg: ma.tkgraph.xtreamtv
  bash arg: 1
args: [-p, ma.tkgraph.xtreamtv, 1]
 arg: "-p"
 arg: "ma.tkgraph.xtreamtv"
 arg: "1"
data="ma.tkgraph.xtreamtv"
** No activities found to run, monkey aborted.
PS D:\07-Logiciels\11-IPTV Andoid TV 2>

elle a démarré avec : 
PS D:\07-Logiciels\11-IPTV Andoid TV 2> adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity
Starting: Intent { cmp=ma.tkgraph.xtreamtv/.MainActivity }
PS D:\07-Logiciels\11-IPTV Andoid TV 2>


chatgpt response

Très bien, le diagnostic est confirmé :

monkey : No activities found to run
am start -n ma.tkgraph.xtreamtv/.MainActivity : démarre

Donc l’activité existe, l’application fonctionne, mais elle n’est pas déclarée comme application lançable pour le launcher. C’est exactement le problème du AndroidManifest.xml.

Il faut ajouter :

<category android:name="android.intent.category.LAUNCHER" />

en plus de :

<category android:name="android.intent.category.LEANBACK_LAUNCHER" />

Parce que manifestement Google TV a besoin qu’on lui explique deux fois où est la porte.


1. Corriger le Manifest automatiquement

Copie-colle ceci dans PowerShell :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

$path = ".\app\src\main\AndroidManifest.xml"
$content = Get-Content $path -Raw

$leanback = '                <category android:name="android.intent.category.LEANBACK_LAUNCHER" />'
$launcher = '                <category android:name="android.intent.category.LAUNCHER" />'

if ($content -notmatch 'android.intent.category.LAUNCHER') {
    $content = $content.Replace($leanback, "$leanback`r`n$launcher")
    [System.IO.File]::WriteAllText(
        "D:\07-Logiciels\11-IPTV Andoid TV 2\app\src\main\AndroidManifest.xml",
        $content,
        [System.Text.UTF8Encoding]::new($false)
    )
}

type ".\app\src\main\AndroidManifest.xml"

Tu dois voir maintenant dans le fichier :

<intent-filter>
    <action android:name="android.intent.action.MAIN" />
    <category android:name="android.intent.category.LEANBACK_LAUNCHER" />
    <category android:name="android.intent.category.LAUNCHER" />
</intent-filter>


2. Recompiler l’APK

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon

Attends :

BUILD SUCCESSFUL


3. Désinstaller l’ancienne version

C’est important, sinon Google TV peut garder l’ancien état du launcher.

adb uninstall ma.tkgraph.xtreamtv


4. Réinstaller la nouvelle version

adb install ".\app\build\outputs\apk\debug\app-debug.apk"


5. Tester le lancement normal

adb shell monkey -p ma.tkgraph.xtreamtv 1

Cette fois, tu ne dois plus avoir :

No activities found to run


6. Vérifier les activités lançables

Teste aussi :

adb shell cmd package resolve-activity --brief -a android.intent.action.MAIN -c android.intent.category.LAUNCHER ma.tkgraph.xtreamtv

Puis :

adb shell cmd package resolve-activity --brief -a android.intent.action.MAIN -c android.intent.category.LEANBACK_LAUNCHER ma.tkgraph.xtreamtv

Tu dois voir MainActivity.


7. Si le bouton “Ouvrir” reste désactivé

Redémarre simplement la box :

adb reboot

Après redémarrage, va dans les applications. Le bouton Ouvrir devrait être actif.

Le fait que cette commande fonctionne :

adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

confirme que le code de l’app n’est pas le problème. Il faut juste corriger la déclaration launcher, reconstruire, désinstaller, réinstaller. La plomberie Android dans toute sa splendeur.


you asked

message time: 2026-06-10 20:27:19

ça marche maintenant


chatgpt response

Parfait. L’application démarre maintenant sur la box Google TV. Donc le cycle infernal est validé :

Projet compilé
APK générée
APK installée
Application lançable

La cause était bien le AndroidManifest.xml : l’activité existait, mais elle n’était pas correctement exposée au launcher TV. Android, ce grand philosophe, avait donc installé l’application sans lui donner de bouton pour l’ouvrir.

Prochaine étape logique

Maintenant tu peux tester :

URL serveur Xtream
Username
Password

Puis vérifier :

si la connexion API fonctionne ;
si les chaînes Live se chargent ;
si le lecteur démarre bien le flux ;
si le zapping / retour télécommande fonctionne correctement.

Commandes à garder

Pour recompiler après modification :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon

Pour réinstaller :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

Pour lancer :

adb shell monkey -p ma.tkgraph.xtreamtv 1

Ou directement :

adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

À faire maintenant

Avant de modifier plus loin, garde une copie du dossier actuel, parce que là tu as une version fonctionnelle de base :

Copy-Item "D:\07-Logiciels\11-IPTV Andoid TV 2" "D:\07-Logiciels\11-IPTV Andoid TV 2 - version OK lancement" -Recurse

Ensuite, on pourra améliorer proprement :

design TV plus professionnel ;
mémorisation des identifiants Xtream ;
catégories Live ;
favoris ;
EPG / guide TV ;
zapping chaîne suivante/précédente ;
écran de chargement et messages d’erreur propres.

Bref, maintenant on passe de “ça démarre” à “ça ressemble à un vrai produit”, cette étape rare où le logiciel cesse d’être seulement une preuve que l’univers tolère notre souffrance.


you asked

message time: 2026-06-10 20:31:13

ok


chatgpt response

Nickel. Garde cette version comme base stable avant de toucher au reste.

Prochaine priorité conseillée

On devrait améliorer dans cet ordre :

Sauvegarde des identifiants Xtream

éviter de retaper URL, username, password à chaque ouverture.


Chargement des catégories Live

Sports, Films, News, Général, etc.


Interface TV plus propre

cartes plus grandes ;
focus visible ;
navigation télécommande fluide.


Favoris

ajouter / retirer une chaîne favorite.


Lecteur vidéo amélioré

bouton retour ;
chaîne suivante / précédente ;
message si le flux ne marche pas.


EPG / guide TV

programme actuel et suivant.

Sauvegarde recommandée

Fais une copie de sécurité maintenant :

Copy-Item "D:\07-Logiciels\11-IPTV Andoid TV 2" "D:\07-Logiciels\11-IPTV Andoid TV 2 - OK lancement" -Recurse

Voilà. On a transformé un ZIP en APK installée sur Google TV. L’informatique a brièvement obéi, événement assez rare pour être noté.


you asked

message time: 2026-06-10 20:31:51

ok


chatgpt response

Très bien.

Pour la suite, la meilleure prochaine étape est de sauvegarder les identifiants Xtream dans l’application, pour ne pas les retaper à chaque lancement.

On fera ensuite :

1. Sauvegarde URL / username / password
2. Connexion automatique au démarrage
3. Liste des catégories Live
4. Favoris
5. Design TV plus propre
6. EPG

Quand tu veux continuer, on attaque directement les fichiers à modifier, avec le contenu complet de chaque fichier.


you asked

message time: 2026-06-10 20:33:02

ok


chatgpt response

On continue donc avec la sauvegarde automatique des identifiants Xtream. L’application retiendra :

Serveur
Username
Password

Au prochain lancement, elle essaiera de se reconnecter automatiquement. Oui, incroyable, une application qui se souvient de quelque chose, la technologie tient encore debout.

Pour cette première version, on utilise SharedPreferences. C’est suffisant pour tester. Plus tard, on passera en stockage chiffré propre.




1. Fais une sauvegarde avant modification

Copy-Item "D:\07-Logiciels\11-IPTV Andoid TV 2" "D:\07-Logiciels\11-IPTV Andoid TV 2 - OK sauvegarde avant identifiants" -Recurse


2. Copie-colle ce bloc PowerShell complet

Il va créer/modifier les fichiers nécessaires.

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

New-Item -ItemType Directory -Force -Path ".\app\src\main\java\ma\tkgraph\xtreamtv\data\storage"

$configStorage = @'
package ma.tkgraph.xtreamtv.data.storage

import android.content.Context
import ma.tkgraph.xtreamtv.data.model.XtreamConfig

class ConfigStorage(context: Context) {

    private val preferences = context.applicationContext.getSharedPreferences(
        PREFERENCES_NAME,
        Context.MODE_PRIVATE
    )

    fun save(config: XtreamConfig) {
        preferences.edit()
            .putString(KEY_SERVER_URL, config.serverUrl.trim())
            .putString(KEY_USERNAME, config.username.trim())
            .putString(KEY_PASSWORD, config.password.trim())
            .apply()
    }

    fun load(): XtreamConfig? {
        val serverUrl = preferences.getString(KEY_SERVER_URL, null)
            ?.trim()
            ?.takeIf { it.isNotBlank() }
            ?: return null

        val username = preferences.getString(KEY_USERNAME, null)
            ?.trim()
            ?.takeIf { it.isNotBlank() }
            ?: return null

        val password = preferences.getString(KEY_PASSWORD, null)
            ?.trim()
            ?.takeIf { it.isNotBlank() }
            ?: return null

        return XtreamConfig(
            serverUrl = serverUrl,
            username = username,
            password = password
        )
    }

    fun clear() {
        preferences.edit().clear().apply()
    }

    companion object {
        private const val PREFERENCES_NAME = "xtream_config"
        private const val KEY_SERVER_URL = "server_url"
        private const val KEY_USERNAME = "username"
        private const val KEY_PASSWORD = "password"
    }
}
'@

[System.IO.File]::WriteAllText(
    "D:\07-Logiciels\11-IPTV Andoid TV 2\app\src\main\java\ma\tkgraph\xtreamtv\data\storage\ConfigStorage.kt",
    $configStorage,
    [System.Text.UTF8Encoding]::new($false)
)

$loginScreen = @'
package ma.tkgraph.xtreamtv.ui.screens

import androidx.compose.foundation.background
import androidx.compose.foundation.layout.Arrangement
import androidx.compose.foundation.layout.Box
import androidx.compose.foundation.layout.Column
import androidx.compose.foundation.layout.Spacer
import androidx.compose.foundation.layout.fillMaxSize
import androidx.compose.foundation.layout.fillMaxWidth
import androidx.compose.foundation.layout.height
import androidx.compose.foundation.layout.padding
import androidx.compose.foundation.layout.widthIn
import androidx.compose.material3.Button
import androidx.compose.material3.CircularProgressIndicator
import androidx.compose.material3.MaterialTheme
import androidx.compose.material3.OutlinedTextField
import androidx.compose.material3.Text
import androidx.compose.runtime.Composable
import androidx.compose.runtime.getValue
import androidx.compose.runtime.mutableStateOf
import androidx.compose.runtime.remember
import androidx.compose.runtime.rememberCoroutineScope
import androidx.compose.runtime.setValue
import androidx.compose.ui.Alignment
import androidx.compose.ui.Modifier
import androidx.compose.ui.text.input.PasswordVisualTransformation
import androidx.compose.ui.unit.dp
import kotlinx.coroutines.launch
import ma.tkgraph.xtreamtv.data.model.LiveStreamDto
import ma.tkgraph.xtreamtv.data.model.XtreamConfig
import ma.tkgraph.xtreamtv.data.network.XtreamApiFactory
import ma.tkgraph.xtreamtv.data.repository.XtreamRepository

@Composable
fun LoginScreen(
    initialConfig: XtreamConfig? = null,
    initialErrorMessage: String? = null,
    onLoginSuccess: (XtreamConfig, List<LiveStreamDto>) -> Unit
) {
    var serverUrl by remember(initialConfig?.serverUrl) {
        mutableStateOf(initialConfig?.serverUrl.orEmpty())
    }

    var username by remember(initialConfig?.username) {
        mutableStateOf(initialConfig?.username.orEmpty())
    }

    var password by remember(initialConfig?.password) {
        mutableStateOf(initialConfig?.password.orEmpty())
    }

    var isLoading by remember { mutableStateOf(false) }

    var errorMessage by remember(initialErrorMessage) {
        mutableStateOf(initialErrorMessage)
    }

    val scope = rememberCoroutineScope()

    Box(
        modifier = Modifier
            .fillMaxSize()
            .background(MaterialTheme.colorScheme.background)
            .padding(48.dp),
        contentAlignment = Alignment.Center
    ) {
        Column(
            modifier = Modifier.widthIn(max = 720.dp),
            verticalArrangement = Arrangement.spacedBy(18.dp),
            horizontalAlignment = Alignment.Start
        ) {
            Text(
                text = "Xtream TV Player",
                style = MaterialTheme.typography.headlineLarge,
                color = MaterialTheme.colorScheme.onBackground
            )

            Text(
                text = "Connecte ton accès Xtream compatible pour charger les chaînes Live.",
                style = MaterialTheme.typography.bodyLarge,
                color = MaterialTheme.colorScheme.onBackground.copy(alpha = 0.75f)
            )

            Spacer(modifier = Modifier.height(8.dp))

            OutlinedTextField(
                modifier = Modifier.fillMaxWidth(),
                value = serverUrl,
                onValueChange = { serverUrl = it },
                label = { Text("Serveur : http://exemple.com:8080") },
                singleLine = true
            )

            OutlinedTextField(
                modifier = Modifier.fillMaxWidth(),
                value = username,
                onValueChange = { username = it },
                label = { Text("Utilisateur") },
                singleLine = true
            )

            OutlinedTextField(
                modifier = Modifier.fillMaxWidth(),
                value = password,
                onValueChange = { password = it },
                label = { Text("Mot de passe") },
                singleLine = true,
                visualTransformation = PasswordVisualTransformation()
            )

            Button(
                enabled = !isLoading &&
                    serverUrl.isNotBlank() &&
                    username.isNotBlank() &&
                    password.isNotBlank(),
                onClick = {
                    scope.launch {
                        isLoading = true
                        errorMessage = null

                        runCatching {
                            val config = XtreamConfig(
                                serverUrl = serverUrl.trim(),
                                username = username.trim(),
                                password = password.trim()
                            )

                            val repository = XtreamRepository(
                                XtreamApiFactory.create(config.serverUrl)
                            )

                            val account = repository.checkAccount(
                                username = config.username,
                                password = config.password
                            )

                            val isAuthorized = account.userInfo?.auth == "1"
                            val isActive = account.userInfo?.status.equals(
                                other = "Active",
                                ignoreCase = true
                            )

                            if (!isAuthorized || !isActive) {
                                error("Compte non autorisé ou abonnement inactif.")
                            }

                            val streams = repository.loadLiveStreams(
                                username = config.username,
                                password = config.password
                            )

                            onLoginSuccess(config, streams)
                        }.onFailure { throwable ->
                            errorMessage = throwable.message ?: "Connexion impossible au serveur."
                        }

                        isLoading = false
                    }
                }
            ) {
                if (isLoading) {
                    CircularProgressIndicator(
                        modifier = Modifier.height(22.dp),
                        strokeWidth = 2.dp
                    )
                } else {
                    Text("Se connecter")
                }
            }

            errorMessage?.let { message ->
                Text(
                    text = message,
                    color = MaterialTheme.colorScheme.error,
                    style = MaterialTheme.typography.bodyMedium
                )
            }
        }
    }
}
'@

[System.IO.File]::WriteAllText(
    "D:\07-Logiciels\11-IPTV Andoid TV 2\app\src\main\java\ma\tkgraph\xtreamtv\ui\screens\LoginScreen.kt",
    $loginScreen,
    [System.Text.UTF8Encoding]::new($false)
)

$mainActivity = @'
package ma.tkgraph.xtreamtv

import android.os.Bundle
import androidx.activity.ComponentActivity
import androidx.activity.compose.setContent
import androidx.compose.foundation.background
import androidx.compose.foundation.layout.Arrangement
import androidx.compose.foundation.layout.Box
import androidx.compose.foundation.layout.Column
import androidx.compose.foundation.layout.fillMaxSize
import androidx.compose.material3.CircularProgressIndicator
import androidx.compose.material3.MaterialTheme
import androidx.compose.material3.Text
import androidx.compose.runtime.Composable
import androidx.compose.runtime.LaunchedEffect
import androidx.compose.runtime.getValue
import androidx.compose.runtime.mutableStateOf
import androidx.compose.runtime.remember
import androidx.compose.runtime.setValue
import androidx.compose.ui.Alignment
import androidx.compose.ui.Modifier
import androidx.compose.ui.platform.LocalContext
import androidx.compose.ui.unit.dp
import ma.tkgraph.xtreamtv.data.model.LiveStreamDto
import ma.tkgraph.xtreamtv.data.model.XtreamConfig
import ma.tkgraph.xtreamtv.data.network.XtreamApiFactory
import ma.tkgraph.xtreamtv.data.repository.XtreamRepository
import ma.tkgraph.xtreamtv.data.storage.ConfigStorage
import ma.tkgraph.xtreamtv.ui.screens.HomeScreen
import ma.tkgraph.xtreamtv.ui.screens.LoginScreen
import ma.tkgraph.xtreamtv.ui.screens.PlayerScreen
import ma.tkgraph.xtreamtv.ui.theme.XtreamTvTheme
import ma.tkgraph.xtreamtv.util.XtreamUrlBuilder

class MainActivity : ComponentActivity() {
    override fun onCreate(savedInstanceState: Bundle?) {
        super.onCreate(savedInstanceState)
        setContent {
            XtreamTvTheme {
                XtreamTvApp()
            }
        }
    }
}

private sealed interface AppScreen {
    data object Loading : AppScreen
    data object Login : AppScreen
    data object Home : AppScreen
    data class Player(val title: String, val url: String) : AppScreen
}

@Composable
private fun XtreamTvApp() {
    val context = LocalContext.current
    val configStorage = remember { ConfigStorage(context) }

    var screen by remember { mutableStateOf<AppScreen>(AppScreen.Loading) }
    var config by remember { mutableStateOf<XtreamConfig?>(null) }
    var liveStreams by remember { mutableStateOf<List<LiveStreamDto>>(emptyList()) }
    var loginErrorMessage by remember { mutableStateOf<String?>(null) }

    LaunchedEffect(Unit) {
        val savedConfig = configStorage.load()

        if (savedConfig == null) {
            screen = AppScreen.Login
            return@LaunchedEffect
        }

        runCatching {
            val streams = loadLiveStreamsFromServer(savedConfig)
            config = savedConfig
            liveStreams = streams
            loginErrorMessage = null
            screen = AppScreen.Home
        }.onFailure {
            configStorage.clear()
            config = null
            liveStreams = emptyList()
            loginErrorMessage = "Connexion automatique impossible. Vérifie tes identifiants."
            screen = AppScreen.Login
        }
    }

    when (val currentScreen = screen) {
        AppScreen.Loading -> LoadingScreen(
            message = "Connexion automatique en cours..."
        )

        AppScreen.Login -> LoginScreen(
            initialConfig = configStorage.load(),
            initialErrorMessage = loginErrorMessage,
            onLoginSuccess = { newConfig, streams ->
                configStorage.save(newConfig)
                config = newConfig
                liveStreams = streams
                loginErrorMessage = null
                screen = AppScreen.Home
            }
        )

        AppScreen.Home -> HomeScreen(
            streams = liveStreams,
            onStreamSelected = { stream ->
                val currentConfig = config ?: return@HomeScreen

                val url = XtreamUrlBuilder.liveUrl(
                    config = currentConfig,
                    streamId = stream.streamId,
                    extension = "m3u8"
                )

                screen = AppScreen.Player(
                    title = stream.name.orEmpty().ifBlank { "Chaîne ${stream.streamId}" },
                    url = url
                )
            },
            onLogout = {
                configStorage.clear()
                config = null
                liveStreams = emptyList()
                loginErrorMessage = null
                screen = AppScreen.Login
            }
        )

        is AppScreen.Player -> PlayerScreen(
            title = currentScreen.title,
            streamUrl = currentScreen.url,
            onBack = { screen = AppScreen.Home }
        )
    }
}

@Composable
private fun LoadingScreen(
    message: String
) {
    Box(
        modifier = Modifier
            .fillMaxSize()
            .background(MaterialTheme.colorScheme.background),
        contentAlignment = Alignment.Center
    ) {
        Column(
            verticalArrangement = Arrangement.spacedBy(18.dp),
            horizontalAlignment = Alignment.CenterHorizontally
        ) {
            CircularProgressIndicator()
            Text(
                text = message,
                color = MaterialTheme.colorScheme.onBackground,
                style = MaterialTheme.typography.bodyLarge
            )
        }
    }
}

private suspend fun loadLiveStreamsFromServer(
    config: XtreamConfig
): List<LiveStreamDto> {
    val repository = XtreamRepository(
        XtreamApiFactory.create(config.serverUrl)
    )

    val account = repository.checkAccount(
        username = config.username,
        password = config.password
    )

    val isAuthorized = account.userInfo?.auth == "1"
    val isActive = account.userInfo?.status.equals(
        other = "Active",
        ignoreCase = true
    )

    if (!isAuthorized || !isActive) {
        error("Compte non autorisé ou abonnement inactif.")
    }

    return repository.loadLiveStreams(
        username = config.username,
        password = config.password
    )
}
'@

[System.IO.File]::WriteAllText(
    "D:\07-Logiciels\11-IPTV Andoid TV 2\app\src\main\java\ma\tkgraph\xtreamtv\MainActivity.kt",
    $mainActivity,
    [System.Text.UTF8Encoding]::new($false)
)


3. Compiler

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon

Résultat attendu :

BUILD SUCCESSFUL


4. Réinstaller sur la box

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

Puis lance :

adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

Ou :

adb shell monkey -p ma.tkgraph.xtreamtv 1


Résultat attendu

Après cette modification :

première ouverture : tu saisis les identifiants Xtream ;
connexion réussie : l’app sauvegarde les identifiants ;
prochaine ouverture : connexion automatique ;
bouton Déconnexion : supprime les identifiants sauvegardés.

Voilà, l’app commence enfin à avoir une mémoire. Modeste, certes, mais déjà plus fiable que beaucoup de réunions humaines.


you asked

message time: 2026-06-10 20:37:36

ok, l'appli a bien sa mémoire


chatgpt response

Parfait. Donc maintenant l’app sait :

1. Sauvegarder les identifiants Xtream
2. Se reconnecter automatiquement au démarrage
3. Supprimer les identifiants avec Déconnexion

On a donc une vraie base fonctionnelle. Une application avec de la mémoire, chose qui reste malheureusement supérieure à certains logiciels payants.

À faire avant la suite

Fais une sauvegarde de cette version stable :

Copy-Item "D:\07-Logiciels\11-IPTV Andoid TV 2" "D:\07-Logiciels\11-IPTV Andoid TV 2 - OK mémoire Xtream" -Recurse

Prochaine amélioration recommandée

La suite logique : ajouter les catégories Live.

Actuellement, l’app charge probablement toutes les chaînes en une seule liste. Il faut maintenant organiser :

Toutes les chaînes
Sports
Films
News
Documentaires
Enfants
Maroc
France
Arabes
Favoris

Techniquement, on va ajouter :

1. API get_live_categories
2. Modèle LiveCategoryDto
3. Affichage des catégories à gauche
4. Filtrage des chaînes par category_id
5. Bouton “Toutes”
6. Préparation pour “Favoris”

Commande Xtream utilisée :

/player_api.php?username=USER&password=PASS&action=get_live_categories

Ensuite, chaque chaîne Live possède déjà généralement :

category_id

Donc on peut filtrer proprement sans bricoler la liste comme un humain pressé un vendredi à 18h.

État actuel du projet

Tu as maintenant :

Élément Statut
Compilation APK OK
Installation Google TV OK
Lancement application OK
Connexion Xtream OK
Mémoire identifiants OK
Connexion automatique OK
Catégories Live Prochaine étape
Favoris Après catégories
EPG Après favoris
Design TV premium Après structure fonctionnelle

La prochaine intervention doit modifier principalement :

XtreamApi.kt
LiveCategoryDto.kt
XtreamRepository.kt
MainActivity.kt
HomeScreen.kt

On peut passer à l’étape catégories Live avec les fichiers complets à remplacer.


you asked

message time: 2026-06-10 20:39:33

procède directement et donne moi le fichier zip avec tous les fichiers modifiés


chatgpt response

C’est prêt. J’ai préparé le ZIP avec les fichiers modifiés pour ajouter les catégories Live Xtream et garder les corrections déjà validées : mémoire des identifiants, launcher Google TV, Gradle corrigé, etc. Bref, pas juste trois fichiers balancés au hasard dans un sac plastique numérique.

Télécharger le ZIP

📦 Télécharger la mise à jour Catégories Live

Ce que le ZIP ajoute

Appel API Xtream :

action=get_live_categories

Nouveau modèle :

LiveCategoryDto.kt

Affichage des catégories à gauche.
Filtrage des chaînes par catégorie.
Compteur de chaînes par catégorie.
Catégorie “Toutes”.
Catégorie “Non classées” si nécessaire.
Conservation de la mémoire des identifiants.
Manifest corrigé avec :

LEANBACK_LAUNCHER
LAUNCHER

Fichiers inclus

build.gradle.kts
gradle.properties
gradle/libs.versions.toml
app/build.gradle.kts
app/src/main/AndroidManifest.xml
app/src/main/java/ma/tkgraph/xtreamtv/MainActivity.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/model/LiveCategoryDto.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/network/XtreamApi.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/repository/XtreamRepository.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/storage/ConfigStorage.kt
app/src/main/java/ma/tkgraph/xtreamtv/ui/screens/LoginScreen.kt
app/src/main/java/ma/tkgraph/xtreamtv/ui/screens/HomeScreen.kt
apply-update.ps1
README_UPDATE_CATEGORIES.md

Installation rapide

Décompresse le ZIP dans ton projet :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

Copy-Item "D:\07-Logiciels\11-IPTV Andoid TV 2" "D:\07-Logiciels\11-IPTV Andoid TV 2 - Backup avant categories" -Recurse

Expand-Archive -Path "$env:USERPROFILE\Downloads\xtream-google-tv-player-categories-update.zip" -DestinationPath "D:\07-Logiciels\11-IPTV Andoid TV 2" -Force

Puis compile :

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon

Puis installe sur la box :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"
adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

Option avec script inclus

Après extraction, tu peux aussi lancer :

.\apply-update.ps1

Ce script fait la sauvegarde, copie les fichiers et lance la compilation. Oui, un script qui travaille pendant que nous contemplons l’absurdité du cycle compiler-installer-tester.


you asked

message time: 2026-06-10 21:01:54

ça marche. on avance plus rapidement maintenant : 

Design sophistiqué
Possibilité de mettre des chaines en favori
quand on fait retour arrière, on revient dans le menu à la même chaine et même catégorie
possibilité d'épingler une chaine pour démarrer directement avec cette chaine
afficher la résolution de la chaine
zone de recherche de catégorie
zone de recherche de chaine
naviguer avec les boutons droite/gauche pour zapper entre les chaines


chatgpt response

C’est prêt. J’ai préparé un ZIP avec les fichiers modifiés pour passer à une version plus avancée de l’app. On commence enfin à quitter le territoire du “ça démarre” pour entrer dans celui du “ça ressemble à un vrai produit”, événement rare dans le monde Android.

Télécharger le ZIP

📦 Télécharger la mise à jour avancée Google TV

Fonctions ajoutées

Cette mise à jour ajoute :

design TV plus sophistiqué ;
favoris chaînes ;
catégorie Favoris automatique ;
retour depuis le lecteur vers la même catégorie et la même chaîne ;
chaîne épinglée au démarrage ;
affichage de la résolution détectée pendant la lecture ;
recherche de catégorie ;
recherche de chaîne ;
zapping gauche/droite dans le lecteur ;
raccourcis clavier/test :← / → : chaîne précédente / suivante ;
F : favori ;
P : épingler.

Fichiers modifiés dans le ZIP

app/src/main/java/ma/tkgraph/xtreamtv/MainActivity.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/storage/ConfigStorage.kt
app/src/main/java/ma/tkgraph/xtreamtv/ui/screens/HomeScreen.kt
app/src/main/java/ma/tkgraph/xtreamtv/ui/screens/PlayerScreen.kt
README_UPDATE_ADVANCED_TV.md
apply-update.ps1

Installation rapide

Décompresse le ZIP dans ton projet :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

Copy-Item "D:\07-Logiciels\11-IPTV Andoid TV 2" "D:\07-Logiciels\11-IPTV Andoid TV 2 - Backup avant update avancee" -Recurse

Expand-Archive -Path "$env:USERPROFILE\Downloads\xtream-google-tv-player-advanced-update.zip" -DestinationPath "D:\07-Logiciels\11-IPTV Andoid TV 2" -Force

Puis compile :

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon

Installe sur la box :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"
adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

Option avec script

Après extraction :

.\apply-update.ps1

Puis :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"
adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

Note importante

Je n’ai pas compilé l’APK ici dans ton environnement Windows, donc si Gradle décide encore de réciter de la poésie d’erreur, envoie seulement le bloc à partir de :

FAILURE: Build failed

Pas tout le roman judiciaire de la JVM.


you asked

message time: 2026-06-10 21:17:08

on avance, mais le menu ne ressemble pas à grand chose, les caractères sont trop gros. dans les zones de texte, la couleur est foncé dans un arrière plan foncé. pas de noms de chaines. impossible d'arriver aux moutons épingler ou favori. essaie de réduire la taille des zones et du texte. je te laisse voir.


chatgpt response

Tu as raison : l’interface était trop massive, les boutons mangeaient tout l’espace, et les noms de chaînes se faisaient écraser comme une pauvre variable dans un vieux script PowerShell. J’ai préparé une mise à jour UI compacte.

Télécharger le ZIP

📦 Télécharger la mise à jour UI compacte

Corrections incluses

Textes réduits.
Zones de recherche plus petites.
Texte des champs en blanc sur fond sombre.
Catégories plus compactes.
Liste des chaînes plus lisible.
Noms des chaînes visibles.
Suppression des gros boutons dans chaque ligne.
Ajout d’une barre d’action séparée pour :regarder ;
ajouter / retirer favori ;
épingler / désépingler.


Les boutons ne devraient plus écraser le nom des chaînes.
Le focus TV est plus propre.

Installation

Dans PowerShell :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

Copy-Item "D:\07-Logiciels\11-IPTV Andoid TV 2" "D:\07-Logiciels\11-IPTV Andoid TV 2 - Backup avant UI compacte" -Recurse

Expand-Archive -Path "$env:USERPROFILE\Downloads\xtream-google-tv-player-ui-compact-update.zip" -DestinationPath "D:\07-Logiciels\11-IPTV Andoid TV 2" -Force

Puis compile :

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon

Installe sur la box :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"
adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

Ce qui a changé techniquement

Le ZIP modifie surtout :

app/src/main/java/ma/tkgraph/xtreamtv/ui/screens/HomeScreen.kt

J’ai aussi inclus :

README_UPDATE_UI_COMPACT.md
apply-update.ps1

Je n’ai pas compilé dans ton environnement Windows, donc si Gradle refait son numéro de diva, envoie uniquement la partie à partir de :

FAILURE: Build failed


you asked

message time: 2026-06-10 21:26:36

c mieux, mais toujours impossible d'accéder au boutons favorie et epingler.


chatgpt response

Oui, là le problème est clair : les boutons Favori et Épingler sont dans une barre d’action au-dessus de la liste, mais la navigation TV reste coincée dans la liste. Merci Android TV, ce labyrinthe ergonomique payé au focus perdu.

J’ai corrigé ça avec une version où les actions sont directement dans chaque ligne de chaîne.

Télécharger le ZIP corrigé

📦 Télécharger la mise à jour UI Focus Actions

Ce que cette version change

Les boutons ne sont plus seulement en haut.
Chaque chaîne affiche maintenant :Voir
☆ / ★ Favori
Pin / Ép.


Depuis une ligne de chaîne, tu peux aller vers la droite avec la télécommande pour atteindre les actions.
Texte encore un peu réduit.
Badges et boutons plus compacts.
Le nom de la chaîne garde plus d’espace.
La barre du haut devient informative, elle ne bloque plus l’accès aux actions.

Installation

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

Copy-Item "D:\07-Logiciels\11-IPTV Andoid TV 2" "D:\07-Logiciels\11-IPTV Andoid TV 2 - Backup avant UI focus actions" -Recurse

Expand-Archive -Path "$env:USERPROFILE\Downloads\xtream-google-tv-player-ui-focus-actions-update.zip" -DestinationPath "D:\07-Logiciels\11-IPTV Andoid TV 2" -Force

Compile :

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon

Installe sur la box :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"
adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

Navigation attendue

Dans la liste des chaînes :

OK sur le nom de chaîne  = regarder
Droite                  = accéder à Voir / ★ / Pin
★                       = ajouter ou retirer des favoris
Pin                     = épingler la chaîne
Ép.                     = chaîne déjà épinglée

Là, les boutons devraient enfin être atteignables sans devoir supplier la télécommande comme un oracle capricieux.


you asked

message time: 2026-06-10 21:40:14

l'affichage sur la chaine de la résolution et nom de la chaine, les indications doivent disparaitre après 3 secondes et quand l'utilisateur clique sur le bouton retour, les infos apparaissent, un deuxième clique sur retour permet de revenir au menu. sinon, supprime les infos : F:favori, P épingler ça ne sert à rien. aussi tu peux ajouter la confirmation de quitter l'application quand on clique sur retour dans le menu. quand on revient au menu à partir d'une chaine, le focus doit être sur le nom de la chaine pas dans les zones de texte.


chatgpt response

J’ai préparé la mise à jour. Elle corrige exactement les points que tu viens de signaler, parce qu’à ce stade on fait de l’ergonomie, pas du mobilier décoratif pour télécommande hostile.

Télécharger le ZIP

📦 Télécharger la mise à jour Player / Retour / Focus

Corrections incluses

Dans le lecteur :

nom de la chaîne + résolution visibles au démarrage ;
disparition automatique après 3 secondes ;
premier clic sur Retour : les infos réapparaissent ;
deuxième clic sur Retour : retour au menu.


Suppression des indications inutiles :

F : favori
P : épingler


Dans le menu :

bouton Retour affiche une confirmation avant de quitter l’application ;
au retour depuis une chaîne, le focus revient sur la ligne de la chaîne sélectionnée, pas dans les champs de recherche.

Installation

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

Copy-Item "D:\07-Logiciels\11-IPTV Andoid TV 2" "D:\07-Logiciels\11-IPTV Andoid TV 2 - Backup avant player back focus" -Recurse

Expand-Archive -Path "$env:USERPROFILE\Downloads\xtream-google-tv-player-player-back-focus-update.zip" -DestinationPath "D:\07-Logiciels\11-IPTV Andoid TV 2" -Force

Puis compile :

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon

Installe :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"
adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

Fichiers modifiés

app/src/main/java/ma/tkgraph/xtreamtv/MainActivity.kt
app/src/main/java/ma/tkgraph/xtreamtv/ui/screens/HomeScreen.kt
app/src/main/java/ma/tkgraph/xtreamtv/ui/screens/PlayerScreen.kt

Si Gradle refait son opéra tragique, envoie uniquement le bloc à partir de FAILURE: Build failed.


you asked

message time: 2026-06-10 21:46:04

tu peux ajouter les logo des chainens


you asked

message time: 2026-06-10 21:47:09

ok. maintenant on peux ajouter les logos aux chaines dans l'application. ne part pas sur de la création d'image STP.


chatgpt response

Tu as raison, pas de génération d’image. Là on parle des logos fournis par Xtream via le champ stream_icon, pas d’inventer des logos façon usine à hallucinations graphiques.

Télécharger le ZIP

📦 Télécharger la mise à jour Logos chaînes

Ce que ça ajoute

Affichage du logo de chaque chaîne dans la liste.
Affichage du logo dans l’overlay du lecteur avec le nom de la chaîne et la résolution.
Fallback automatique avec initiales si le logo est absent ou impossible à charger.
Ajout de Coil 3 pour charger les images distantes dans Compose. La doc officielle Coil indique bien l’usage de coil-compose avec AsyncImage, et recommande aussi une dépendance réseau comme coil-network-okhttp pour les images distantes. (coil-kt.github.io)

Fichiers inclus

app/build.gradle.kts
app/src/main/java/ma/tkgraph/xtreamtv/MainActivity.kt
app/src/main/java/ma/tkgraph/xtreamtv/ui/screens/HomeScreen.kt
app/src/main/java/ma/tkgraph/xtreamtv/ui/screens/PlayerScreen.kt
app/src/main/java/ma/tkgraph/xtreamtv/ui/components/ChannelLogo.kt
README_UPDATE_LOGOS.md
apply-update.ps1

Installation

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

Copy-Item "D:\07-Logiciels\11-IPTV Andoid TV 2" "D:\07-Logiciels\11-IPTV Andoid TV 2 - Backup avant logos chaines" -Recurse

Expand-Archive -Path "$env:USERPROFILE\Downloads\xtream-google-tv-player-logos-update.zip" -DestinationPath "D:\07-Logiciels\11-IPTV Andoid TV 2" -Force

Puis compile :

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon

Installe :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"
adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

Les logos dépendront évidemment de ce que ton fournisseur Xtream renvoie dans stream_icon. Si leur serveur envoie des liens cassés, vides ou moisis, l’app affichera les initiales. L’humanité ne manque jamais une occasion de casser une URL.


you asked

message time: 2026-06-10 21:54:38

on peut programmer maintenant l'epg et le replay


chatgpt response

Oui. J’ai préparé une mise à jour avec EPG + Replay / Catch-up pour les flux Xtream compatibles.

Télécharger le ZIP

📦 Télécharger la mise à jour EPG + Replay

Ce que cette version ajoute

Chargement EPG via :

player_api.php?action=get_short_epg

Affichage dans le menu :

programme en cours ;
programme suivant ;
indication Replay si disponible.


Bouton Replay dans la ligne de la chaîne.


Lecture replay via URL Xtream :

/timeshift/username/password/durée/date/stream_id.ts

Affichage dans le lecteur :

logo ;
nom de chaîne ;
résolution ;
programme en cours ;
badge Replay quand on lit un replay.


Conservation :

favoris ;
épinglage ;
recherche ;
zapping gauche/droite ;
retour vers la même chaîne dans le menu.

Fichiers modifiés / ajoutés

app/build.gradle.kts
app/src/main/java/ma/tkgraph/xtreamtv/MainActivity.kt
app/src/main/java/ma/tkgraph/xtreamtv/ui/screens/HomeScreen.kt
app/src/main/java/ma/tkgraph/xtreamtv/ui/screens/PlayerScreen.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/model/EpgProgramDto.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/model/EpgShortResponse.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/model/LiveStreamDto.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/model/LiveCategoryDto.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/network/XtreamApi.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/repository/XtreamRepository.kt
app/src/main/java/ma/tkgraph/xtreamtv/util/XtreamUrlBuilder.kt
README_UPDATE_EPG_REPLAY.md
apply-update.ps1

Installation

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

Copy-Item "D:\07-Logiciels\11-IPTV Andoid TV 2" "D:\07-Logiciels\11-IPTV Andoid TV 2 - Backup avant EPG replay" -Recurse

Expand-Archive -Path "$env:USERPROFILE\Downloads\xtream-google-tv-player-epg-replay-update.zip" -DestinationPath "D:\07-Logiciels\11-IPTV Andoid TV 2" -Force

Puis compile :

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon

Installe sur la box :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"
adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

Important

Le replay dépend totalement du serveur Xtream. Il faut que ton fournisseur renvoie correctement :

tv_archive
has_archive
start
end
epg_listings

Si le serveur ne fournit pas ces données, l’EPG affichera EPG indisponible ou le bouton Replay restera désactivé. Charmant, mais au moins ce sera honnête.


you asked

message time: 2026-06-10 22:04:27

PS D:\07-Logiciels\11-IPTV Andoid TV 2> .\gradlew.bat clean --no-daemon
To honour the JVM settings for this build a single-use Daemon process will be forked. For more on this, please refer to https://docs.gradle.org/9.1.0/userguide/gradle_daemon.html#sec:disabling_the_daemon in the Gradle documentation.
Daemon will be stopped at the end of the build

BUILD SUCCESSFUL in 7s
1 actionable task: 1 executed
PS D:\07-Logiciels\11-IPTV Andoid TV 2> .\gradlew.bat :app:assembleDebug --no-daemon
To honour the JVM settings for this build a single-use Daemon process will be forked. For more on this, please refer to https://docs.gradle.org/9.1.0/userguide/gradle_daemon.html#sec:disabling_the_daemon in the Gradle documentation.
Daemon will be stopped at the end of the build

Task :app:compileDebugKotlin FAILED
e: file:///D:/07-Logiciels/11-IPTV%20Andoid%20TV%202/app/src/main/java/ma/tkgraph/xtreamtv/data/model/EpgProgramDto.kt:107:25 Unsupported escape sequence.
e: file:///D:/07-Logiciels/11-IPTV%20Andoid%20TV%202/app/src/main/java/ma/tkgraph/xtreamtv/data/model/EpgProgramDto.kt:107:31 Unsupported escape sequence.



[Incubating] Problems report is available at: file:///D:/07-Logiciels/11-IPTV%20Andoid%20TV%202/build/reports/problems/problems-report.html

FAILURE: Build failed with an exception.

What went wrong:
Execution failed for task ':app:compileDebugKotlin'.

A failure occurred while executing org.jetbrains.kotlin.compilerRunner.btapi.BuildToolsApiCompilationWork
Compilation error. See log for more details




Try:

Run with --stacktrace option to get the stack trace.
Run with --info or --debug option to get more log output.
Run with --scan to generate a Build Scan (Powered by Develocity).
Get more help at https://help.gradle.org.

BUILD FAILED in 17s
29 actionable tasks: 29 executed
PS D:\07-Logiciels\11-IPTV Andoid TV 2>


chatgpt response

Erreur simple : dans Kotlin, \d dans une chaîne classique n’est pas accepté. Il fallait écrire la regex en chaîne brute. Encore une victoire du langage contre la santé mentale.

La ligne fautive était :

Regex("(\d{2}:\d{2})")

Elle est corrigée en :

Regex("""(\d{2}:\d{2})""")

ZIP corrigé

📦 Télécharger la mise à jour EPG + Replay corrigée

Installation

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

Expand-Archive -Path "$env:USERPROFILE\Downloads\xtream-google-tv-player-epg-replay-fix1.zip" -DestinationPath "D:\07-Logiciels\11-IPTV Andoid TV 2" -Force

Puis :

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon

Ensuite :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"
adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

Correction rapide sans ZIP

Tu peux aussi corriger directement avec PowerShell :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

$content = Get-Content ".\app\src\main\java\ma\tkgraph\xtreamtv\data\model\EpgProgramDto.kt" -Raw
$content = $content -replace 'Regex$"\(\\d\{2\}:\\d\{2\}$"\)', 'Regex("""(\d{2}:\d{2})""")'
Set-Content ".\app\src\main\java\ma\tkgraph\xtreamtv\data\model\EpgProgramDto.kt" $content

Le ZIP corrigé est plus propre. Le patch direct existe au cas où Windows décide encore de transformer une tâche simple en rite initiatique.


you asked

message time: 2026-06-10 22:12:09

le replay marche. mais il ne te donne pas le choix de l'emission pour la quelle tu veux voir le replay, il faut pour chaque chaine sélectionnée avoir la liste du programme complet sur les jours qu'on a, l'utilisateur choisi l'émission à revoir.


chatgpt response

Tu as raison : le replay qui lance seulement “l’émission courante”, c’est trop limité. C’est un replay avec amnésie sélective, magnifique concept, mais mauvais produit.

J’ai préparé une mise à jour avec un vrai écran Guide Replay par chaîne.

Télécharger le ZIP

📦 Télécharger la mise à jour Replay Guide complet

Ce que ça ajoute

Le bouton Replay devient Guide.
Quand tu sélectionnes une chaîne, tu peux ouvrir le programme complet disponible.
Les émissions sont groupées par jour.
L’utilisateur choisit directement l’émission à revoir.
Ajout d’une recherche dans les émissions.
Bouton Revoir sur chaque programme disponible.
Retour vers le menu en gardant la chaîne sélectionnée.
Lecture toujours via l’URL Xtream timeshift.

Fichiers modifiés / ajoutés

app/build.gradle.kts
app/src/main/java/ma/tkgraph/xtreamtv/MainActivity.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/model/EpgProgramDto.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/model/EpgFullResponse.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/network/XtreamApi.kt
app/src/main/java/ma/tkgraph/xtreamtv/data/repository/XtreamRepository.kt
app/src/main/java/ma/tkgraph/xtreamtv/ui/screens/HomeScreen.kt
app/src/main/java/ma/tkgraph/xtreamtv/ui/screens/ReplayGuideScreen.kt

Installation

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

Copy-Item "D:\07-Logiciels\11-IPTV Andoid TV 2" "D:\07-Logiciels\11-IPTV Andoid TV 2 - Backup avant replay guide complet" -Recurse

Expand-Archive -Path "$env:USERPROFILE\Downloads\xtream-google-tv-player-replay-guide-update.zip" -DestinationPath "D:\07-Logiciels\11-IPTV Andoid TV 2" -Force

Puis compile :

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon

Installe sur la box :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"
adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

Utilisation attendue

Dans la liste des chaînes :

Guide → ouvre le programme complet de la chaîne
Revoir → lance l’émission sélectionnée en replay
Retour → revient au menu

Le guide complet dépend toujours de ce que le serveur Xtream renvoie avec get_simple_data_table. Si le fournisseur ne donne que 1 jour, tu verras 1 jour. S’il donne 7 jours, tu verras 7 jours. L’application affiche la vérité du serveur, même quand cette vérité ressemble à un placard vide.


you asked

message time: 2026-06-10 22:17:39

PS D:\07-Logiciels\11-IPTV Andoid TV 2> adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"
Performing Streamed Install
Success
PS D:\07-Logiciels\11-IPTV Andoid TV 2> adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity
Starting: Intent { cmp=ma.tkgraph.xtreamtv/.MainActivity }
PS D:\07-Logiciels\11-IPTV Andoid TV 2>
PS D:\07-Logiciels\11-IPTV Andoid TV 2> .\gradlew.bat clean --no-daemon
To honour the JVM settings for this build a single-use Daemon process will be forked. For more on this, please refer to https://docs.gradle.org/9.1.0/userguide/gradle_daemon.html#sec:disabling_the_daemon in the Gradle documentation.
Daemon will be stopped at the end of the build

BUILD SUCCESSFUL in 11s
1 actionable task: 1 executed
<=============> 100% EXECUTING [8s]
PS D:\07-Logiciels\11-IPTV Andoid TV 2> .\gradlew.bat :app:assembleDebug --no-daemon.\gradlew.bat :app:assembleDebug --no-daemon
To honour the JVM settings for this build a single-use Daemon process will be forked. For more on this, please refer to https://docs.gradle.org/9.1.0/userguide/gradle_daemon.html#sec:disabling_the_daemon in the Gradle documentation.
Daemon will be stopped at the end of the build

FAILURE: Build failed with an exception.

What went wrong:
Problem configuring task :app:assembleDebug from command line.

Unknown command-line option '--no-daemon.\gradlew.bat'.




Try:

Run gradlew help --task :app:assembleDebug to get task usage details.
Run with --stacktrace option to get the stack trace.
Run with --info or --debug option to get more log output.
Run with --scan to generate a Build Scan (Powered by Develocity).
Get more help at https://help.gradle.org.

BUILD FAILED in 6s
PS D:\07-Logiciels\11-IPTV Andoid TV 2>


chatgpt response

L’erreur vient uniquement d’une commande collée deux fois sur la même ligne :

.\gradlew.bat :app:assembleDebug --no-daemon.\gradlew.bat :app:assembleDebug --no-daemon

Gradle a donc compris :

--no-daemon.\gradlew.bat

comme une option bizarre. Évidemment, il n’a pas apprécié cette poésie PowerShell.

Commande correcte

Relance simplement ceci, une ligne à la fois :

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

.\gradlew.bat clean --no-daemon

.\gradlew.bat :app:assembleDebug --no-daemon

Attends :

BUILD SUCCESSFUL

Ensuite installe la nouvelle APK :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

Puis lance :

adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

Bloc complet propre à copier-coller

cd "D:\07-Logiciels\11-IPTV Andoid TV 2"

.\gradlew.bat clean --no-daemon
.\gradlew.bat :app:assembleDebug --no-daemon

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"
adb shell am start -n ma.tkgraph.xtreamtv/.MainActivity

Important

Tu as installé une APK avant de recompiler :

adb install -r ".\app\build\outputs\apk\debug\app-debug.apk"

Donc ta box a probablement encore l’ancienne version, pas forcément la version Replay Guide complet. Il faut bien :

1. compiler avec succès
2. installer après compilation
3. lancer l’app

PowerShell n’a pas cassé le projet. Il a juste avalé deux commandes comme un grille-pain qui mange une fourchette.